N.M. Admin. Code § 19.27.5.13

Current through Register Vol. 35, No. 23, December 10, 2024

Section 19.27.5.13 - ACTION OF THE STATE ENGINEER

The state engineer shall act on all applications that are properly filed.

A. Rejection of application: The state engineer may reject an application for a 72-12-1.1 domestic well permit when the proposed 72-12-1.1 domestic well is to be located in an area where a restriction on the use of water or the drilling of new wells has been imposed by a court. The state engineer may reject an application for a 72-12-1.1 domestic well permit when the proposed 72-12-1.1 domestic well is to be located in an area of water quality concern where a prohibition on or a recommendation against the drilling of new wells has been established by a government entity.

B. Approval of application - conditions of approval: The state engineer may set forth conditions of approval for a 72-12-1.1 domestic well permit, which may include any of the following:

(1) The casing shall not exceed 7 inches outside diameter except under specific conditions in which reasons satisfactory to the state engineer are shown.

(2) The well shall be set back a minimum of 50 feet from any existing well of other ownership.

(3) If artesian water is encountered, all rules and regulations pertaining to the drilling and casing of artesian wells shall be complied with except under specific conditions in which reasons satisfactory to the state engineer are shown.

(4) The well shall be constructed by a driller licensed in the state of New Mexico. A licensed driller shall not be required for the construction of a driven well when the outside diameter of the casing does not exceed two and three-eighths (2 3/8) inches.

(5) Pursuant to Section 72-8-1 NMSA, the permittee shall allow the state engineer and his representatives entry upon private property for the performance of their respective duties, including access to the well for meter reading and water level measurement.

(6) The drilling of the well and amount and uses of water permitted are subject to such limitations as may be imposed by the courts or by lawful municipal and county ordinances which are more restrictive than the conditions of this permit and applicable state engineer regulations.

(7) This permit authorizes the drilling of a well to accompany a house or other dwelling being constructed for sale. Water may only be diverted for activities directly related to the construction of the dwelling that the well will serve. Upon sale of the house or dwelling, the permit holder shall provide the new owner notice in writing of the requirement to file a change of ownership with the state engineer for the 72-12-1.1 domestic well permit. A copy of the notice shall be filed at the office of the state engineer along with a copy of the deed or other instrument of conveyance which conveyed the land upon which the 72-12-1.1 domestic well is located. This condition shall automatically expire when the office of the state engineer accepts a change of ownership for filing in the name of the new owner intending to divert water from the well. No water may be diverted from the 72-12-1.1 domestic well by the new owner until a change of ownership has been recorded at the office of the state engineer.

(8) The permit holder shall ensure that a well record has been filed with the state engineer no later than twenty days after the completion of the well drilling.

(9) Any diversion of water made in excess of the authorized maximum diversion amount in any calendar year shall be repaid with twice the amount of the over-diversion during the following calendar year. Repayment shall be made by either: (a) reducing the diversion during the following calendar year from the 72-12-1.1 domestic well that is the source of the over-diversion; or (b) acquiring or leasing a valid, existing consumptive use water right in an amount equal to the repayment amount and submitting to the state engineer for his approval a plan for the proposed repayment during the following calendar year. The plan for the proposed repayment shall be on a form prescribed by the state engineer.

(10) The permit is subject to cancellation for non-compliance with the conditions of approval or if otherwise not exercised in accordance with the terms of the permit.

(11) The right to divert water under this permit is subject to curtailment by priority administration as implemented by the state engineer or a court.

(12) A 72-12-1.1 domestic well permit shall automatically expire unless the well is completed and the well record is filed with the state engineer within one year of the date of issuance of the permit.

C. Metering requirements: When a metering device is required by the state engineer on a 72-12-1.1 domestic well, the totalizing meter shall be installed before the first branch of the discharge line from the well. The meter installation shall be in accordance with the specifications adopted by the state engineer. The holder of the 72-12-1.1 domestic well permit shall file a meter installation and inspection report with the office of the state engineer, documenting the make, model, serial number, date of installation, and initial reading of the meter prior to diversion of water. Pumping records for the 3 proceeding calendar months shall be submitted to the appropriate state engineer district office on or before the 10^th of January, April, July, and October of each year unless a different reporting period has been established in the conditions of approval of the permit.

(1) The state engineer shall require a meter on each new 72-12-1.1 domestic well permitted:

(a) within a domestic well management area;

(b) when a metering requirement is imposed by the courts;

(c) for drinking and sanitary domestic use that is incidental to the operations of a governmental, commercial, or non-profit facility;

(d) for multiple households domestic use;

(e) as a supplemental 72-12-1.1 well; the 72-12-1.1 domestic well being supplemented shall also require a meter; and

(f) as a multiple use well such that the diversion of water for domestic use is separately metered.

(2) The state engineer may require a meter on a new 72-12-1.1 domestic well:

(a) permitted for single household domestic use;

(b) permitted to accompany a residence or other dwelling constructed for sale;

(c) as a condition of a permit to repair or deepen a 72-12-1.1 domestic well;

(d) as a condition of a permit to amend the type of domestic use of a 72-12-1.1 domestic well permit; or

(e) as a condition of a permit to transfer a valid, existing water right to a 72-12-1.1 domestic well permit in accordance with subsection E of 19.27.5.14 NMAC.

D. Well setbacks: All new 72-12-1.1 domestic wells shall be set back a minimum of 50 feet from an existing well of other ownership unless a variance has been granted by the state engineer. The state engineer may grant a variance for a replacement well or to allow for maximum spacing of the well from a source of groundwater contamination. All 72-12-1.1 domestic wells shall be set back from potential sources of contamination in accordance with the rules and regulations of the New Mexico environment department.

E. Well identification tag: The state engineer may require that a 72-12-1.1 domestic well be tagged with a well identification tag. If a well tag is required, the tag shall be affixed in plain view and the permit holder shall be responsible for maintaining the well identification tag.

F. Permit expiration: Each 72-12-1.1 domestic well permit shall be conditioned by the state engineer to require the 72-12-1.1 domestic well be completed and a well record be filed with the state engineer within one year of the date of issuance of the permit. A 72-12-1.1 domestic well permit shall automatically expire unless the well is completed and the well record is filed with the state engineer within one year of the date of issuance of the permit. No extension of time shall be granted by the state engineer, and if a 72-12-1.1 domestic well permit expires, a new permit shall be obtained and the appropriate fee paid.

G. Well record: The well driller shall keep a record of each well drilled as the work progresses. The well driller shall file a complete well record with the state engineer and the permit holder no later than twenty (20) days after completion of the well drilling. A well log shall be filed for each hole drilled, including a drill hole that does not encounter water. It is the responsibility of the permit holder to ensure that the well record for the 72-12-1.1 domestic well has been properly filed with the state engineer.

N.M. Admin. Code § 19.27.5.13

19.27.5.13 NMAC - N, 8-15-2006; A, 10-31-2011