N.J. Admin. Code § 17:30-11.1

Current through Register Vol. 56, No. 21, November 4, 2024

Section 17:30-11.1 - Cannabis manufacturer premises

(a) All manufacturing of cannabis shall take place in an enclosed indoor, locked area or facility.

(b) Access to the enclosed indoor, locked area or facility shall be limited to Cannabis Business Identification Cardholders when acting on behalf of the cannabis manufacturer within the scope of their responsibilities as an owner, principal, employee, volunteer, management services contractor, or staff member of the license holder.

(c) A cannabis manufacturer shall have an area specifically designated for the safe and orderly manufacturing of cannabis products.

(d) A cannabis manufacturer shall ensure that:

1. All manufacturing areas are well-lighted and ventilated and are maintained in a clean and sanitary condition;

2. Heating and air conditioning systems are controlled to avoid decomposition of chemicals;

3. Sewage, trash, and other refuse in and from the cannabis manufacturer and immediate product manufacturing area are maintained, and disposed of, in a timely, safe, and sanitary manner; and

4. The manufacturing area is easily accessible to hot and cold running water, exclusive of the bathroom sink; soap or detergent; and air dryers or single-source towels.

(e) A cannabis manufacturer operating as a microbusiness shall have a physical plant that does not exceed 2,500 square feet.

N.J. Admin. Code § 17:30-11.1

Adopted by 53 N.J.R. 1583(a), effective 8/19/2021

Amended by 55 N.J.R. 402(a), effective 3/6/2023