N.J. Admin. Code § 16:62-3.2

Current through Register Vol. 56, No. 24, December 18, 2024

Section 16:62-3.2 - Methodology used to delineate Airport Safety Zones

(a) An Airport Safety Zone shall be established for each runway at an airport.

(b) Each Airport Safety Zone shall consist of a RUNWAY SUBZONE, two RUNWAY END SUBZONES and two CLEAR ZONES.

(c) The overall Airport Safety Zone for an airport is geometrically constructed by defining and locating the RUNWAY SUBZONE and RUNWAY END SUBZONES for each runway open to the public on an airport open to the public. The outermost borders of the subzones comprise the outermost boundary of the Airport Safety Zone. The area within those outermost boundaries is that area regulated by the provisions of this chapter.

(d) The methodology used to delineate the overall construction and outermost boundaries of the Airport Safety Zone for an airport is further graphically depicted in Figure 3.

N.J. Admin. Code § 16:62-3.2

Amended by R.1989 d.242, effective 5/15/1989.
See: 20 New Jersey Register 3007(a), 21 New Jersey Register 1376(c).
In (b): Added "and two CLEAR ZONES."
Amended by R.1995 d.76, effective 2/6/1995.
See: 26 New Jersey Register 4502(a), 27 New Jersey Register 525(a).