N.J. Admin. Code § 14:2-5.3

Current through Register Vol. 56, No. 21, November 4, 2024

Section 14:2-5.3 - Types of markouts

(a) There are four types of markouts, as follows:

1. A centerline markout. A centerline markout is required for an underground facility that is 12 inches or less in nominal outside dimension;

2. A centerline offset markout. A centerline offset markout may be used only when both of the following criteria are met:

i. The underground facility is 12 inches or less in nominal outside dimension; and

ii. Site conditions make it impossible to adequately markout the centerline of the underground facility;

3. An outside dimension markout. An outside dimension markout is required for an underground facility that is more than 12 inches in nominal outside dimension; and

4. An outside dimension offset markout. An outside dimension offset markout may be used only when both of the following criteria are met:

i. The underground facility is more than 12 inches in nominal outside dimension; and

ii. Site conditions make it impossible to adequately mark out the centerline or outside walls of the underground facility.

N.J. Admin. Code § 14:2-5.3

Amended by R.2002 d.107, effective 4/1/2002.
See: 33 N.J.R. 2606(a), 34 N.J.R. 1458(a).
Rewrote (b).
New Rule, R.2007 d.298, effective 10/15/2007.
See: 39 N.J.R. 1232(a), 39 N.J.R. 4422(b).
Former N.J.A.C. 14:2-5.3, Color and letter codes for markouts, recodified to N.J.A.C. 14:2-5.2.