N.J. Admin. Code § 13:20-32.26

Current through Register Vol. 56, No. 24, December 18, 2024

Section 13:20-32.26 - Wiring and switching requirements, all vehicles; commercial vehicle inspection at official inspection facilities

(a) Certification of a commercial vehicle shall be refused for any of the following reasons:

1. The wiring is not in proper condition, is improperly installed, or is so located as to cause damage;

2. Any connection that is not secure or shows signs of corrosion;

3. The switches are not in proper condition or do not function properly;

4. Any light circuit that does not light the proper filament when the appropriate switch position is applied; or

5. Any defect in wiring and/or switching which adversely affects the lighting performance of any exterior light.

(b) Certification of a commercial vehicle shall not be refused if replacement switches are present that perform the same function as the original switches; provided the safe operation of the motor vehicle is not adversely affected.

(c) Certification of a commercial vehicle shall not be refused if replacement switches are present that perform the same function as the original switches, but are not located in the original switch position (s); provided the safe operation of the motor vehicle is not adversely affected.

N.J. Admin. Code § 13:20-32.26

Repealed by 48 N.J.R. 810(a), effective 5/16/2016

Adopted by 53 N.J.R. 2056(a), effective 12/6/2021