Section 445B.232 - Excess emissions: Scheduled maintenance, testing or repairs; notification of Director; malfunction, upset, start-up, shutdown or human error1. Scheduled maintenance or testing or scheduled repairs which may result in excess emissions of regulated air pollutants prohibited by NAC 445B.001 to 445B.3689, inclusive, must be approved in advance by the Director and performed during a time designated by the Director as being favorable for atmospheric ventilation.2. Each owner or operator shall notify the Director of the proposed time and expected duration at least 30 days before any scheduled maintenance or testing which may result in excess emissions of regulated air pollutants prohibited by NAC 445B.001 to 445B.3689, inclusive. The scheduled maintenance or testing must not be conducted unless the scheduled maintenance or testing is approved pursuant to subsection 1.3. Each owner or operator shall notify the Director of the proposed time and expected duration at least 24 hours before any scheduled repairs which may result in excess emissions of regulated air pollutants prohibited by NAC 445B.001 to 445B.3689, inclusive. The scheduled repairs must not be conducted unless the scheduled repairs are approved pursuant to subsection 1.4. Each owner or operator shall notify the Director of any excess emissions within 24 hours after any malfunction or upset of the process equipment or equipment for controlling pollution or during start-up or shutdown of that equipment.5. Each owner or operator shall provide the Director, within 15 days after any malfunction, upset, start-up, shutdown or human error which results in excess emissions, sufficient information to enable the Director to determine the seriousness of the excess emissions. The information must include at least the following: (a) The identity of the stack or other point of emission, or both, where the excess emissions occurred.(b) The estimated magnitude of the excess emissions expressed in opacity or in the units of the applicable limitation on emission and the operating data and methods used in estimating the magnitude of the excess emissions.(c) The time and duration of the excess emissions.(d) The identity of the equipment causing the excess emissions.(e) If the excess emissions were the result of a malfunction, the steps taken to remedy the malfunction and the steps taken or planned to prevent the recurrence of the malfunction.(f) The steps taken to limit the excess emissions.(g) Documentation that the equipment for controlling air pollution, process equipment or processes were at all times maintained and operated, to a maximum extent practicable, in a manner consistent with good practice for minimizing emissions.6. Each owner or operator shall ensure that any notification or related information submitted to the Director pursuant to this section is provided in a format specified by the Director.Nev. Admin. Code § 445B.232
Environmental Comm'n, Air Quality Reg. §§ 2.5.1-2.5.3, eff. 11-7-75; A 8-28-79; § 2.5.4, eff. 11-7-75; §§ 2.5.4.1-2.5.4.7, eff. 8-28-79-NAC A 8-22-86; 9-19-90; 10-30-95; R065-03, 10-30-2003; R191-08, 12-17-2008; R040-10, 7-22-2010