Section 411-5-006 - TOURIST-ORIENTED DIRECTIONAL TRAILBLAZER SIGNS006.01 Trailblazer signs shall be required at all intersections where the direction of the route changes or where it might be questionable as to which highway to follow.006.02 No TODS panel shall be erected until adequate Trailblazers, as determined by the Department, are in place off the State Highway System.006.03 Order of Display 006.03A Trailblazer signs shall be erected in the same order as TODS panels.006.04 Design 006.04A Sign sizes, including the border, if any, shall be as specified in the MUTCD and these Rules and Regulations. The corners of the signs shall be trimmed to conform to the required radius as shown in Illustration 9. All edges shall be smooth and free of burrs.006.05 Material 006.05A Trailblazer signs shall be fabricated from a single sheet of minimum thickness 0.10 aluminum of alloys 6061-T6 or 5052-H38.006.06 Structural Supports006.06A Trailblazer signs shall be mounted on wood or steel posts which conform to the requirements for Type "A" Signs as shown in Illustrations 11 and 12.411 Neb. Admin. Code, ch. 5, § 006