Actual emissions as defined in Chapter 1 will be calculated using one of the following methods, as appropriate, and subject to Department approval:
003.01 Source-specific emissions. 003.01A Any test method or procedure identified in Chapter 15.003.01B Continuous emission monitor (CEM) data, provided that: 003.01B1 The CEM operation is, and has been for the reporting period, in compliance with all applicable requirements and applicable requirements under the Act;003.01B2 The total operating time of the applicable emission unit and the CEM are included in the inventory report; and003.01B3 The report includes an explanation of how the emissions were calculated using CEM data.003.02 Where source-specific emission data are not available, the following may be used: 003.02A Any applicable method identified in the Compilation of Air Pollutant Emission Factors, Volume I, Stationary Point and Area Sources, Fifth Edition;003.02B Any applicable method identified in Factor Information Retrieval System Version 5.0 Source Classification Codes and Emission Factor Listing for Criteria Air Pollutants, EPA-454/R-95-012, August 1995; or003.02C A material mass balance equation.129 Neb. Admin. Code, ch. 11, § 003
Amended effective 9/28/2022