Upon the consent of the permittee, the Director may modify a permit to make the corrections or allowances for changes in the permitted activity listed in this section. Any permit modification not processed as minor modification under this section must be made for cause and with draft permit and public notice as required. Minor modifications may only:
003.01 Correct typographical errors;003.02 Require more frequent monitoring or reporting by the permittee;003.03 Change an interim compliance date in a schedule of compliance, provided the new date is not more than 120 days after the date specified in the existing permit and does not interfere with attainment of the final compliance date requirement;003.04 Allow for a change in ownership of a facility where the Director determines that no other change in the permit is necessary, provided that a written agreement containing a specific date for transfer of permit responsibility, coverage, and liability between the current and new permittees has been submitted to the Director;003.05 Change quantities or types of fluids injected which are within the capacity of the facility as permitted and, in the judgment of the Director, after reviewing information required, would not interfere with the operation of the facility or its ability to meet conditions prescribed in the permit, and would not change the classification of the facility's injection well(s);003.06 Change construction requirements approved by the Director, provided that any such alteration shall comply with the requirements of these regulations; or003.07 Amend a plugging and abandonment plan which has been updated.122 Neb. Admin. Code, ch. 30, § 003