Mo. Code Regs. tit. 20 § 4240-120.085
Current through Register Vol. 49, No. 23, December 2, 2024
Section 20 CSR 4240-120.085 - Re-Inspection and Re-Inspection FeePURPOSE: This rule outlines the procedure for the re-inspection of manufactured homes and third party requests for inspections pursuant to section 700.040, RSMo.
(1) Re-inspections subsequent to routine inspections of new manufactured homes. (A) The manager may conduct re-inspections of new manufactured homes to verify corrections have been made to address code violations identified on the initial routine inspection report.(B) The manager shall not assess the dealer, installer, or the manufacturer, or each entity, a fee for the first re-inspection.(C) The manager, in consultation with the commission staff director, after attempting to contact the entity involved and documenting consideration of potential mitigating factors, including, but not limited to, the number of similar non-compliance issues, circumstances beyond the entity's control, and the entity's responsiveness to commission requirements, may assess re-inspection fee(s) of two hundred dollars ($200) for any re-inspection subsequent to the first re-inspection. The fee is charged to the dealer, installer, or the manufacturer who was responsible for making the corrections and completing the corrections. The manager will track fees assessed or waived under this provision, along with any documented consideration of mitigating factors, and compile a quarterly report summarizing such information for review by the commission. (2) Re-inspections subsequent to a consumer complaint.(A) The manager may conduct re-inspections of new manufactured homes to determine if the required corrections have been completed by the dealer, installer, or manufacturer within sixty (60) days of the initial inspection.(B) The manager, in consultation with the commission staff director, after attempting to contact the entity involved and documenting consideration of potential mitigating factors, including, but not limited to, the number of similar non-compliance issues, circumstances beyond the entity's control, and the entity's responsiveness to commission requirements, may assess the dealer, installer, or the manufacturer, or each entity, a fee for the re-inspection(s) if the dealer, installer, or the manufacturer responsible for making the required corrections fails to complete the required corrections within sixty (60) days of receipt of a consumer complaint. The fee shall not be charged to the dealer, installer, or the manufacturer who is responsible for making the required corrections if, during the re-inspection, it is found that the required corrections have been corrected within sixty (60) days of the initial inspection. The manager will track fees assessed or waived under this provision, along with any documented consideration of mitigating factors, and compile a quarterly report summarizing such information for review by the commission.(3) The re-inspection shall address all violations listed in the initial inspection report. A copy of the re-inspection report shall be forwarded to the manufacturer, installer, or dealer, or each responsible entity, and the consumer, if applicable, within ten (10) days from the date of the re-inspection, for corrective action as well as an invoice for the re-inspection fee, if applicable.(4) The assessed fee shall be paid to the commission within twenty (20) working days from the date the re-inspection is completed. Each manufacturer, installer, and dealer shall submit, along with the fee, a written plan of action to be taken by each to correct any remaining violations identified and, unless otherwise approved by the manager, corrections shall be completed within thirty (30) days of the re-inspection.(5) The fee for all inspections requested by third parties is four hundred dollars ($400), except the fee for third party inspection requests for the purpose of serial number verification is two hundred dollars ($200). Requests for inspections by third parties must be submitted in writing to the manufactured housing and modular units program along with the associated inspection fee. Licensed manufacturers or dealers are not considered third parties.(6) If the manufacturer, installer, or dealer has not paid the re-inspection fee within thirty (30) days of the prescribed date, the manager may file a complaint and the commission may suspend the manufacturer, installer, or dealer certificate or registration.(7) The following situations constitute grounds for the denial, revocation, or placing on probation of a manufacturer, installer, or dealer certificate of registration: (A) Failure to pay a re-inspection fee by the prescribed due date for two (2) consecutive months; or(B) Failure to pay a re-inspection fee by the prescribed due date for any four (4) of the preceding twelve (12) months.AUTHORITY: section 700.040, RSMo 2016.* This rule originally filed as 4 CSR 240-120.085. Original rule filed June 16, 2004, effective Jan. 30, 2005. Amended: Filed Aug. 15, 2013, effective March 30, 2014. Amended: Filed July 6, 2017, effective March 30, 2018. Moved to 20 CSR 4240-120.085, effective Aug. 28, 2019.*Original authority: 700.040, RSMo 1973, amended 1976, 1978. 1982, 1984, 1989, 1993, 1995, 1999.