Minn. R. agency 167, ch. 7083, LICENSING AND CERTIFICATION, pt. 7083.1020

Current through Register Vol. 49, No. 24, December 9, 2024

Part 7083.1020 - SSTS INDIVIDUAL CERTIFICATION AND TRAINING PROGRAM

Subpart 1.Purpose.

Parts 7083.1020 to 7083.1090 establish the SSTS individual certification and training program. This program establishes training, experience, and examination requirements for SSTS individual certification. An individual is allowed to be certified in the following specialty areas:

A. designer;

B. advanced designer;

C. inspector;

D. advanced inspector;

E. installer;

F. maintainer; and

G. service provider.

Subp. 2.Program components.

An individual must successfully complete the following components for a specialty area to qualify for certification in that specialty area:

A. training described under part 7083.1030;

B. examination described under part 7083.1040;

C. experience described under part 7083.1050; and

D. continuing education described under part 7083.1060.

Subp. 3.Application.

An individual who qualifies under subpart 2, items A to C, for a specialty area is allowed to apply to be certified by the commissioner according to part 7083.1080. Individuals who complete subpart 2, items A and B, for a specialty area are allowed to apply to receive an apprentice designation according to part 7083.1090.

Subp. 4.Certification period.

A certification issued by the commissioner is valid for a three-year period.

Subp. 5.Applicable certification specialty area.

In the case of SSTS work not described under parts 7083.0710 to 7083.0800, the commissioner shall determine which certification specialty area is applicable.

Minn. R. agency 167, ch. 7083, LICENSING AND CERTIFICATION, pt. 7083.1020

32 SR 1420

Statutory Authority: MS s 115.03; 115.55