Minn. R. agency 167, ch. 7041, pt. 7041.3100
Current through Register Vol. 49, No. 25, December 16, 2024
Part 7041.3100 - PROCEDURE TO DETERMINE ANNUAL WHOLE SLUDGE APPLICATION RATE (AWSAR)A. This part contains the procedure used to determine the AWSAR for a sewage sludge that does not cause the annual pollutant loading rates in part 7041.1100, subpart 4, item D, to be exceeded. The relationship between the annual pollutant loading rate (APLR) for a pollutant and the AWSAR for a sewage sludge is shown in the equation in this subpart. APLR = C x AWSAR x 0.001
Where,
APLR = Annual pollutant loading rate in kilograms per hectare per 365-day period.
C = Pollutant concentration in milligrams, per kilogram of total solids (dry weight basis).
AWSAR = Annual whole sludge application rate in metric tons per hectare per 365-day period (dry weight basis).
0.001 = A conversion factor.B. To determine the AWSAR, the equation in subpart one is rearranged as follows: | AWSAR = | APLR _____ C x 0.001 | |
The procedure used to determine the AWSAR is described in subitems (1) to (4).
(1) Analyze a sample of the sewage sludge to determine the concentration for each of the pollutants listed in part 7041.1100, subpart 4, item D, in the sewage sludge.(2) Using the pollutant concentrations from subpart 1 and the APLRs from part 7041.1100, subpart 4, item D, calculate an AWSAR for each pollutant using the equation in this subpart.(3) The AWSAR for the sewage sludge is the lowest AWSAR calculated in this subpart.(4) To convert the AWSAR to pounds per acre, multiply the AWSAR (in Kg/ha) by .892.Minn. R. agency 167, ch. 7041, pt. 7041.3100
Statutory Authority: MS s 116.07