Minn. R. agency 167, ch. 7011, SECONDARY BRASS AND BRONZE INGOT PRODUCTION PLANTS, pt. 7011.1910

Current through Register Vol. 49, No. 27, December 30, 2024

Part 7011.1910 - PERFORMANCE TEST METHODS

Unless another method is approved by the agency, an owner or operator required to submit performance tests for a brass or bronze ingot production plant must use the following test methods to demonstrate compliance:

A. Method 1 for sample and velocity traverses;

B. Method 2 for velocity and volumetric flow rate;

C. Method 3 for gas analysis;

D. Method 5 for the concentration of filterable particulate matter and the associated moisture content.

Minn. R. agency 167, ch. 7011, SECONDARY BRASS AND BRONZE INGOT PRODUCTION PLANTS, pt. 7011.1910

18 SR 614

41 SR 763

Statutory Authority: MS s 116.07