Minn. R. agency 151, ch. 1341, pt. 1341.0104

Current through Register Vol. 49, No. 24, December 9, 2024

Part 1341.0104 - A117.1 SECTION 104, CONVENTIONS

Subpart 1.A117.1 Section 104.2, Dimensions.

A117.1 Section 104.2 is amended to read as follows:

104.2 Dimensions. Dimensions that are not stated as "maximum" or "minimum" are absolute. All dimensions are subject to conventional industry tolerances except where the dimension is stated as a range with specific minimum and maximum end points.

Subp. 2.Section 104.6.

A117.1 Section 104 is amended by adding a Section to read as follows:

104.6 Calculation of Percentages. Where the required number of elements or facilities to be provided is determined by calculations of ratios or percentages and remainders or fractions result, the next greater whole number of such elements or facilities shall be provided. Where the determination of the required size or dimension of an element or facility involves ratios or percentages, rounding down for values less than one-half shall be permitted.

Minn. R. agency 151, ch. 1341, pt. 1341.0104

32 SR 9; L 2007 c 140 art 4 s 61; art 13 s 4; L 2008 c 337 s 64

Statutory Authority: MS s 16B.37; 16B.59 to 16B.76; 326B.101 to 326B.194