Mich. Admin. Code R. 408.16542
Current through Vol. 24-21, December 1, 2024
Rule 6542. A mill, regardless of roll size or roll arrangement, shall be stopped by braking equipment within a distance, measured in inches of surface travel of the faster roll, of not more than 1 1/2% of the peripheral no-load surface speed of the roll as determined in feet per minute. (See figure 2)
All measurements on mills shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed in inches of surface travel of the faster roll from the instant the emergency stopping device is actuated.
Mich. Admin. Code R. 408.16542