Section R. 408.16206 - Definitions; M to QRule 6206.
(1) "Matched metal molding" means a method of molding reinforced plastics between 2 close-fitting metal molds mounted in a power press.(2) "Nip point" means a point at which it is possible to be caught between 2 or more shafts or rolls that rotate parallel to each other in opposite directions.(3) "Operator" means any employee who is assigned to operate or anyone who comes around plastic processing equipment and who is exposed to the point of operation.(4) "Pinch point" means a point at which it is possible for an employee to be caught between moving parts of a machine or between moving and stationary parts of a machine.(5) "Plastic scrap granulator" means a machine that has rotating knives which cut plastic articles into particles.(6) "Point of operation" means the area of a machine where material is actually worked.(7) "Qualified person" means one who, by knowledge, training, and experience, has successfully demonstrated, to the employer, his or her ability to solve or resolve problems relating to the subject matter, the work, or the project.Mich. Admin. Code R. 408.16206