Section R. 408.16204 - Definitions; B to ERule 6204.
(1) "Blow molding machine" means a plasticizer and a clamping unit that work in conjunction with each other so that the plasticizer produces molten plastic which is blown by air, gas, or liquid and the clamping unit performs the manufacture of hollow products.(2) "Compression molding machine" means a machine that uses temperature-controlled molds for pressing plastic material into the shape of a mold cavity.(3) "Device" means a machine control that is designed and installed to perform either of the following functions: (a) Prevent normal machine operation if the operator's hands are within the point of operation.(b) Require the concurrent use of both hands of the operator to actuate the machine.(4) "Dielectric sealing" means a process for bonding plastic films using high-frequency energy.(5) "Expansion molding" means to make plastic shapes by expanding polystyrene beads with a heating medium within a mold.(6) "Extrusion machine" means a plasticizer which is mounted on a base and which takes raw plastic material, changes it into a molten state, and extrudes it through a die into a predetermined shape.Mich. Admin. Code R. 408.16204
1979 AC; 1992 AACS; 2015 MR 7, Eff. April 13, 2015