Section R. 408.15001 - Adoption of standards by referenceRule 5001.
(1) The federal Occupational Safety and Health Administration (OSHA) regulation 29 C.F.R. § 1910.268 "Telecommunications," as amended November 18, 2016, is adopted in these rules, except as noted in this rule.(2) The subrules 29 C.F.R. § 1910.268(a)(2)(i) and (a)(3) are excepted.(3) The words "for purposes of 29 C.F.R. 1910.34," as used in 29 C.F.R. § 1910.268(b)(1)(iii), are excepted.(4) A reference to § 1910.110 "Storage and handling of liquefied petroleum gases," means General Industry Safety Standard Part 56 "Storage and Handling of Liquefied Petroleum Gases," as referenced in R 408.15004.(5) "Assistant Secretary for Occupational Safety and Health," means director of the department of licensing and regulatory affairs.(6) A reference to § 1910.137, "Electrical protective devices," means General Industry Safety and Health Standard Part 33 "Personal Protective Equipment," as referenced in R 408.15004.(7) A reference to "Subpart D," means General Industry Safety and Health Standard Part 2 "Walking-Working Surfaces," as referenced in R 408.15004.(8) A reference to § 1910.25(c)(5), means Construction Safety Standard Part 30 "Telecommunications for Construction," R 408.43004 "Trolley and side-rolling ladders," as referenced in R 408.15004.(9) A reference to § 1910.133, or "Subpart I," means General Industry Safety and Health Standard Part 33 "Personal Protective Equipment," as referenced in R 408.15004.(10) A reference to "Subpart Q," means General Industry Safety Standard Part 12 "Welding and Cutting," as referenced in R 408.15004.(11) A reference to "Subpart W of Part 1926," means Construction Safety Standard Part 13 "Mobile Equipment," as referenced in R 408.15004.(12) A reference to § 1910.97, means Occupational Health Standard Part 382 "Nonionizing Radiation," as referenced in R 408.15004.(13) A reference to American National Standards Institute Standard ANSI A92.2, "Vehicle-Mounted Elevating and Rotating Devices," 1969 edition, is adopted in these rules.(14) A reference to ANSI B30.6 "Safety Code for Derricks," 1969 edition, means American Society of Mechanical Engineers Standard ASME B30.6 "Safety Code for Derricks," 1969 edition, is adopted in these rules.(15) A reference to ANSI Z89.2 "Industrial Protective Helmets for Electrical Workers," 1971 edition, is adopted in these rules.(16) A reference to American Society for Testing and Materials Standard ASTM B117, "Standard Practice for Operating Salt Spray (Fog) Apparatus," 1964 edition, is adopted in these rules.(17) A reference to ANSI J6.6 - 1971 edition, means ASTM D120 "Standard Specification for Rubber Insulating Gloves," 1977 edition, is adopted in these rules.(18) The adopted federal regulations have the same force and effect as a rule promulgated under the Michigan occupational safety and health act, 1974 PA Act No. 154, MCL 408.1001 to 408.1094.Mich. Admin. Code R. 408.15001
2005 AACS; 2015 AACS; 2017 MR 2, Eff. Jan. 27, 2017; 2018 MR 3, Eff. 2/13/2018