Mich. Admin. Code R. 408.13902

Current through Vol. 24-21, December 1, 2024

Section R. 408.13902 - Adoption of federal standards

Rule 3902.

(1) The following federal occupational safety and health administration (OSHA) regulations from the Code of Federal Regulations are adopted by reference in these rules:

(a)29 C.F.R. §1910.302 "Electric utilization systems."

(b)29 C.F.R. §1910.303 "General."

(c)29 C.F.R. §1910.304 "Wiring design and protection."

(d)29 C.F.R. §1910.305 "Wiring methods, components, and equipment for general use."

(e)29 C.F.R. §1910.306 "Specific purpose equipment and installations."

(f)29 C.F.R. §1910.307 "Hazardous (classified) locations."

(g)29 C.F.R. §1910.308 "Special systems."

(h)29 C.F.R. §1910.399 "Definitions applicable to this subpart."

(2) The adopted federal regulations shall have the same force and effect as a rule promulgated under 1974 PA 154, MCL 408.1001 to 408.1094.

(3) A reference to C.F.R. § 1910.147"General Environmental Controls-The control of hazardous energy (lockout/tagout)," means General Industry Safety Standard Part 85 "The Control of Hazardous Energy Sources," as referenced in R 408.13905.

(4) A reference to C.F.R. § 1910.332"Electrical-Training," means General Industry Safety Standard Part 40 "Electrical Safety-Related Work Practices," as referenced in R 408.13905.

Mich. Admin. Code R. 408.13902

1994 AACS; 2007 AACS; 2015 MR 9, Eff. May 12, 2015