Section R. 408.12501 - Adoption of federal standardRule 2501.
(1) The federal Occupational Safety and Health Administration (OSHA) regulation 29 C.F.R. § 1910.68, "Manlifts," as amended November 18, 2016, is adopted by reference in these rules.(2) The availability information for the OSHA standard adopted in these rules is in R 408.41205 and MIOSHA standards referenced in these rules is in R 408.12510.(3) A reference to 29 C.F.R. § 1910, Subpart D "Walking-Working Surfaces," means General Industry Safety and Health Standard Part 2 "Walking-Working Surfaces."(4) A reference to ANSI standard A90.1 "Manlifts," 1969 edition, means this standard.(5) A reference to either of the following means General Industry Safety Standard Part 7 "Guards for Power Transmission:" (a) ANSI standard B15.1 "Safety Code for Mechanical Power Transmission Apparatus," 1958 edition.(b)29 C.F.R. § 1910, Subpart O, "Machinery and Machine Guarding."(6) A reference to 29 C.F.R. § 1910, Subpart S, "Electrical," means both of the following: (a) General Industry Safety Standard Part 39 "Design Safety Standards for Electrical Systems."(b) General Industry Safety Standard Part 40 "Safety-Related Work Practices."(7) The adopted federal regulations shall have the same force and effect as a rule promulgated under the Michigan Occupational Safety and Health Act, 1974 PA 154, MCL 408.1001 to 408.1094.Mich. Admin. Code R. 408.12501
1982 AACS; 1997 AACS; 2016 AACS; 2018 AACS; 2019 MR 9, Eff. 5/20/2019An obvious error in R 408.12501 was corrected at the request of the promulgating agency, pursuant to Section 56 of 1969 PA 306, as amended by 2000 PA 262, MCL 24.256. The rule containing the error was published in Annual Administrative Code Supplement, 2018. The memorandum requesting the correction was published in Michigan Register, 2019 MR 9