Section R. 408.11202 - Adoption and referenced standardsRule 1202.
(1) The following standards are adopted by reference in these rules and are available from Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado, 80112, USA; telephone number: 1-800-854-7179; or at web-site: www.global.ihs.com, at a cost as of the time of adoption of these rules as stated in this rule. (a) American National Standards Institute ANSI B31.1 "Industrial Gas and Air Piping Systems," 1967 edition. Cost: $96.00.(b) ANSI B57.1 "Compressed Gas Cylinder Valve Outlet and Inlet Connections," 1965 edition. Cost: $29.00.(c) American Petroleum Institute API 1104 "Standard for Welding Pipe Lines and Related Facilities," 1973 edition. Cost: $125.00.(d) API PSD 2201 "Welding or Hot Tapping on Equipment Containing Flammables," 1963 edition. Cost: $125.00.(e) American Society of Mechanical Engineers ASME A13.1 "Identification of Piping Systems," 1956 edition. Cost: $60.00.(2) The following standards are adopted by reference in these rules and are available from NFPA, 1 Batterymarch Park, Quincy, Massachusetts, USA, 02169-7471; telephone number: 1-617-770-3000; or at website: www.nfpa.org; at a cost as of the time of adoption of these rules as stated in this rule. (a) National Fire Protection Association (NFPA) Standard 50 "Bulk Oxygen Systems," 1971 edition. Cost: $27.00.(b) NFPA 80 "Standard for the Installation of Fire Doors and Windows," 1974 edition. Cost: $27.00.(3) The following standard is adopted by reference in these rules, "The Fire Resistance Directory." This directory is available from Underwriters' Laboratory, 2600 NW Lake Road, Camas, Washington, 98607-8542, USA; telephone number: 1-877-854-3577; or at website: www.ul.com/directories; at a cost as of the time of adoption of these rules of $150.00.(4) The standards adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143.(5) Copies of the standards adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and handling.(6) The following standard is referenced in these rules, General Industry Safety Standard Part 33 Personal Protective Equipment, R 408.13301 to R 408.13398. Up to 5 copies of this standard may be obtained at no charge from the Michigan Department of licensing and regulatory affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, MI, 48909-8143 or at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, at the time of adoption of these rules, is 4 cents per page.Mich. Admin. Code R. 408.11202
An obvious error in R 408.11202 was corrected at the request of the promulgating agency, pursuant to Section 56 of 1969 PA 306, as amended by 2000 PA 262, MCL 24.256. The rule containing the error was published in Annual Administrative Code Supplement, 2013. The memorandum requesting the correction was published in Michigan Register, 2016 MR 1