Section R. 408.42655 - Special trainingRule 2655.
(1) An employer shall ensure that each employee who performs multiple lift rigging has been provided training in both of the following areas: (a) The nature of the hazards associated with multiple lifts.(b) The proper procedures and equipment to perform multiple lifts required by R 408.42610.(2) An employer shall ensure that each connector has been provided training in all of the following areas: (a) The nature of the hazards associated with connecting.(b) The establishment, access, proper connecting techniques, and work practices required by 29 CFR 1926.756(c) and 29 CFR 1926.760(b).(c) Specific training on personnel hoisting as prescribed in Construction Safety Standards Part 28. "Personnel Hoisting in Steel Erection," as referenced in R 408.42601.(3) Where CDZs are being used, an employer shall assure that each employee has been provided training in both of the following areas: (a) The nature of the hazards associated with work within a controlled decking zone.(b) The establishment, access, proper installation techniques, and work practices required by 29 CFR 1926.760(c) and 29 CFR 1926.754(e).Mich. Admin. Code R. 408.42655
2002 AACS; 2007 AACS; 2014 AACS; 2023 MR 24, Eff. 1/3/2024