Section R. 408.42502 - Adoption of standardsRule 2502.
(1) The following standards are adopted by reference in these rules and are available from Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado, 80112, telephone number 1-800-854-7179, website: www.global.ihs.com, at a cost as of the time of adoption of these rules, as stated in this rule: (a) American National Standard Institute standard ANSI A10.9, "Concrete Construction and Masonry Work," 1983 edition. Cost: $20.00.(b) American Welding Society standard AWS D1.1/D1.1M, "Structural Welding Code Steel," 2002 edition. Cost: $468.00. (2) The following standard is adopted by reference in these rules, American Welding Society standard AWS B1.10, "Guide for the Nondestructive Examination of Welds," 1999 edition. This standard is available from The AWS Store Customer Service, 13301 NW 47 Avenue, Opa-Locka, Florida 33054 USA; telephone number: 305-826-6192; or via the internet at website: www.aws.org; at a cost as of the time of adoption of these rules of $104.00.(3) The standards adopted in these rules are available for inspection at the Michigan Department of Licensing And Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan 48909-8143.(4) Copies of these standards may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and handling.Mich. Admin. Code R. 408.42502
2003 AACS; 2013 AACS; 2016 MR 16, Eff. 8/17/2016