La. Admin. Code tit. 43 § XIII-2137

Current through Register Vol. 50, No. 9, September 20, 2024

Section XIII-2137 - Remedial Measures: Transmission Lines [49 CFR 192.485]

A. General Corrosion. Each segment of transmission line with general corrosion and with a remaining wall thickness less than that required for the MAOP of the pipeline must be replaced or the operating pressure reduced commensurate with the strength of the pipe based on actual remaining wall thickness. However, corroded pipe may be repaired by a method that reliable engineering tests and analyses show can permanently restore the serviceability of the pipe. Corrosion pitting so closely grouped as to affect the overall strength of the pipe is considered general corrosion for the purpose of this Subsection. [ 49 CFR 192.485(a)]

B. Localized Corrosion Pitting. Each segment of transmission line pipe with localized corrosion pitting to a degree where leakage might result must be replaced or repaired, or the operating pressure must be reduced commensurate with the strength of the pipe, based on the actual remaining wall thickness in the pits. [ 49 CFR 192.485(b)]

C. Under Subsections A and B of this Section, the strength of pipe based on actual remaining wall thickness must be determined and documented in accordance with §2912 [49 CFR 192.485(c)]

La. Admin. Code tit. 43, § XIII-2137

Promulgated by the Department of Natural Resources, Office of Conservation, LR 9:237 (April 1983), amended LR 10:529 (July 1984), LR 24:1311 (July 1998), LR 27:1545 (September 2001), LR 30:1255 (June 2004), Amended LR 441041 (6/1/2018), Amended LR 501251 (9/1/2024).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.