Current through Register Vol. 43, No. 49, December 5, 2024
Section 92-56-7 - Security; tampering prohibitions; conflict of interest(a) Each manufacturer and each manufacturer's representative shall be responsible for ensuring that the manufacturer's service providers comply with all of the following security requirements: (1) Only authorized employees of a service provider may observe the installation of a device.(2) Reasonable security measures shall be taken to prevent the driver from observing the installation of a device and from obtaining access to installation materials.(3) Service providers shall be prohibited from assisting with, in any manner, tampering or circumvention.(4) Manufacturer's representatives and service providers shall not install or service a device on a vehicle owned or operated by the manufacturer's representative or service provider, or any of the service provider's employees, for division-required installations.(b) Nothing in this regulation shall prohibit a manufacturer, manufacturer's representative, or service provider from installing a device in that entity's vehicles for demonstration and testing purposes.Kan. Admin. Regs. § 92-56-7
Authorized by and implementing K.S.A. 8-1016; effective May 2, 2014.