Current through Register Vol. 43, No. 46, November 14, 2024
Section 36-42-3 - Intermodal transportation project; eligibility(a) For an intermodal transportation project to be eligible for financial assistance, the following requirements shall be met:(1) The qualified borrower shall provide the secretary with the applicant's written assurance of the following: (A) The qualified borrower shall use a licensed professional engineer to design the intermodal transportation project, if approved, in accordance with the then-existing generally recognized and prevailing engineering standards and with the federal and state laws and regulations applicable at the time of design, which shall include any subsequent design revisions for the approved project.(B) The intermodal transportation project, if approved, shall be inspected by an inspector, who shall provide reasonable assurance that the approved project is constructed in substantial conformity with its plans, specifications, and any authorized revisions.(C) The construction of the intermodal transportation project, if approved, shall conform to its plans, specifications, and any authorized revisions.(D) The plans and specifications for the intermodal transportation project, if approved, shall not be revised or deviated from without the approval of the approved project's designer.(2) The intermodal transportation project shall be consistent with the existing or planned state highway system, or both, pursuant to K.S.A. 68-406 and amendments thereto.(b) No portion of an intermodal transportation project's cost shall be eligible for financial assistance under the act if a federal reimbursement has been received for the same portion of the cost.Kan. Admin. Regs. § 36-42-3
Authorized by and implementing K.S.A. 2009 Supp. 75-5083; effective April 30, 2010.