Kan. Admin. Regs. § 110-6-9

Current through Register Vol. 43, No. 46, November 14, 2024

Section 110-6-9 - Application

(a) After the measurement period for a worksite has been established, the applicant may submit an application to the department for certification of the worksite, on a form prescribed by the secretary, together with all supplemental forms and documentation necessary to demonstrate satisfaction of the program requirements. Sufficiency of all submitted documentation shall be determined by the secretary, who may request additional information. A worksite shall not be certified until all program requirements are satisfied.

(b) Certification of the worksite in which the applicant is planning to make a qualified business facility investment, as defined by K.S.A. 79-32,154(e) and amendments thereto, shall be contingent on documentation submitted by the applicant to the department that the worksite has met all statutory criteria during the measurement period, except as specified in K.A.R. 110-6-12(b). However, a determination may be made by the secretary that it is in the best economic interests of the state to allow initial certification or recertification based on a promise of future performance, rather than historical accomplishments, if certification is deemed justified by the magnitude of potential job creation and investment and by other considerations deemed appropriate by the secretary.

Authorized by and implementing K.S.A. 2012 Supp. 74-50,131; effective Sept. 13, 2013.