Iowa Admin. Code r. 571-46.10

Current through Register Vol. 47, No. 13, December 25, 2024

Rule 571-46.10 - Procedures for application and for issuance of a vehicle identification number (VIN) for homebuilt regulated vehicles

(1) A person, other than a manufacturer, who constructs or rebuilds a regulated vehicle for which there is no legible VIN may make application to the department on DNR Form 542-8065 for the issuance of a new VIN. The application process shall include an inspection of the regulated vehicle by the department. If the application is approved, the VIN shall be affixed to the vehicle by a conservation officer. The completed application shall then be surrendered to the county recorder.

(2) The conservation officer shall permanently affix the VIN as follows:

a. All-terrain vehicle. The VIN shall be affixed to the frame under the seat.

b. Off-road motorcycle. The VIN shall be affixed to the steering yoke.

c. Off-road utility vehicle. The VIN shall be affixed to the frame under the seat.

[ARC 8878B, IAB 6/30/10, effective 8/4/10]

Iowa Admin. Code r. 571-46.10