Section 905 IAC 1-48-7 - Transfer of permitsAuthority: IC 7.1-2-3-7; IC 7.1-7-3-3
Affected: IC 7.1-7
Sec. 7.
(a) As used in this section, "sample" means the three (3) ten (10) milliliter sample bottles from each production batch of more than two (2) liters required to be stored or maintained by IC 7.1-7-4-6(b)(15).(b) An e-liquid manufacturer transferring the location of the permit shall maintain the samples in a secure, limited access area during the transfer of location by complying with the following: (1) The e-liquid manufacturer must notify the commission of the anticipated date the samples will be removed from the original location and the anticipated date the samples will be moved into the new location.(2) Samples may only be removed from the secure, limited access area with recorded video surveillance at the original location by designated employees of the e-liquid manufacturer.(3) Samples removed from the secure, limited access area with recorded video surveillance at the original location must be placed immediately in a secure, limited access container or vehicle for transporting to the new permit location.(4) Video surveillance may not be removed or disconnected from the secure, limited access area until all samples are removed to the secure, limited access container or vehicle.(5) The secure, limited access area for the storage of samples at the new location must have operational video surveillance before samples may be placed in the area.(6) The e-liquid manufacturer must notify the commission of the completion of the transfer within five (5) days after the completion of the relocation of the samples and equipment.(7) The e-liquid manufacturer must maintain a list of employees who had access to the samples during the transfer for a period of three (3) years.Alcohol and Tobacco Commission; 905 IAC 1-48-7; filed 12/29/2016, 3:49 p.m.: 20170125-IR-905160326FRA