Section 620 IAC 1-1-3 - Forging machine dies; adoption of federal standardAuthority: IC 22-8-1.1-7
Affected: IC 22-8-1.1-15
Sec. 3.
The Indiana Occupational Safety Standards Commission adopted the following amendment to 29 CFR 1910.218(h)(5) -Forging Machines:
(5) Changing dies. When dies are being changed, maintenance performed, or any work done on the machine, the power to the upsetter shall be locked out and an adequate method be provided to insure that the fly wheel shall be at rest.Occupational Safety Standards Commission; filed Aug 10, 1976, 4:09 pm: Rules and Regs. 1977, p. 228; readopted filed November 26, 2013, 3:26 p.m.: 20131225-IR-620130406RFAReadopted filed 11/27/2019, 3:35 p.m.: 20191225-IR-620190506RFA