Section 312 IAC 13-2-6 - Well recordsAuthority: IC 25-39-4-9
Affected: IC 25-39
Sec. 6.
Within thirty (30) days after completion of a well, a water well driller must submit, on a departmental form or division-approved form, accurate records for each well drilled to include the following information:
(1) The method of well construction.(2) The proposed use of the well, for example: (3) Pumping information, including each of the following: (A) The type of pump and the depth of the pump setting (if applicable).(B) Whether the well was bailer, air, or pump tested.(C) The test rate and length of time of test pumping.(4) Specifications for the well casing and the well screen.(5) The inside diameter of the well.(6) The total depth of the well.(7) The static water level in the well.(8) The name, address, and telephone number of the owner (and the builder, if different from the owner).(9) The name and address of the drilling company.(10) The name and license number of the equipment operator.(11) The type and thickness of formations or materials encountered, including the following: (C) A geological description.(12) A statement of the accuracy of the information contained on the form that is signed by the water well driller or an authorized representative upon an affirmation or attestation.(13) The type, depth, and thickness of grouting materials and method of installation.(14) Specific roadway directions to the well, including a reference to the nearest major highway or street intersection.Natural Resources Commission; 312 IAC 13-2-6; filed Nov 22, 1999, 3:34 p.m.: 23 IR 766; readopted filed Aug 4, 2005, 6:00 p.m.: 28 IR 3661; readopted filed May 20, 2011, 3:28 p.m.: 20110615-IR-312110002RFA; filed Dec 20, 2011, 1:55 p.m.: 20120118-IR-312110332FRAReadopted filed 7/19/2017, 3:45 p.m.: 20170816-IR-312170132RFAReadopted filed 5/17/2023, 10:52 a.m.: 20230614-IR-312230069RFA