Ill. Admin. Code tit. 62 § 240.1020

Current through Register Vol. 48, No. 50, December 13, 2024

Section 240.1020 - Contents of Application

The application for a permit to use a vacuum device on a production well shall include:

a) the name and address of the Permittee;

b) the name of the well;

c) the legal location of the well;

d) the names and depths of the formations subject to a vacuum;

e) a map showing:

1) the boundaries of the leasehold or enhanced oil recovery unit in which the vacuum device will be located;

2) the exact location of the well on which the vacuum device will be installed;

3) the location of all unplugged production wells on the lease or unit;

4) the names of all permittees of producing lease holds within 1/4 mile of the well on which the vacuum device will be located; and

5) the location of all offset production wells located within 1/4 mile of the well on which the vacuum device will be located;

f) Submit evidence of Notice required under Section 240.1040.

Ill. Admin. Code tit. 62, § 240.1020

Section repealed, new Section added at 19 Ill. Reg. 10981, effective July 14, 1995