Ill. Admin. Code tit. 35 § 730.163
Current through Register Vol. 48, No. 49, December 6, 2024
For purposes of Class I hazardous waste injection wells, this Section applies instead of Section 730.106. The area of review for a Class I hazardous waste injection well must be a two-mile radius around the well bore. The Agency may specify by permit condition a larger area of review in the UIC permit if it determines in writing that the larger area is necessary based on the calculated cone of influence of the well.
Ill. Admin. Code tit. 35, § 730.163
Amended at 31 Ill. Reg. 1281, effective December 20, 2006
BOARD NOTE: Derived from 40 CFR 146.63(2005).