Section 11-270-16 - Specific Part B information requirements for tank systems Except as otherwise provided in section 11-264-190, owners and operators of facilities that use tanks to store or treat hazardous waste must provide the following additional information:
(a) A written assessment that is reviewed and certified by an independent, qualified, registered professional engineer as to the structural integrity and suitability for handling hazardous waste of each tank system, as required under sections 11-264-191 and 11-264-192;(b) Dimensions and capacity of each tank;(c) Description of feed systems, safety cutoff, bypass systems, and pressure controls (e.g., vents);(d) A diagram of piping, instrumentation, and process flow for each tank system;(e) A description of materials and equipment used to provide external corrosion protection, as required under subparagraph 11-264-192(a) (3) (ii);(f) For new tank systems, a detailed description of how the tank system(s) will be installed in compliance with subsections 11-264-192(b) through (e);(g) Detailed plans and description of how the secondary containment system for each tank system is or will be designed, constructed, and operated to meet the requirements of subsections 11-264-193(a) through (f);(h) For tank systems for which a variance from the requirements of section 11-264-193 is sought (as provided by subsection 11-264-193(g)): (1) Detailed plans and engineering and hydrogeologic reports, as appropriate, describing alternate design and operating practices that will, in conjunction with location aspects, prevent the migration of any hazardous waste or hazardous constituents into the ground water or surface water during the life of the facility, or(2) A detailed assessment of the substantial present or potential hazards posed to human health or the environment should a release enter the environment.(i) Description of controls and practices to prevent spills and overflows, as required under subsection 11-264-194(b); and(j) For tank systems in which ignitable, reactive, or incompatible wastes are to be stored or treated, a description of how operating procedures and tank system and facility design will achieve compliance with the requirements of sections 11-264-198 and 11-264-199.(k) Information on air emission control equipment as required in section 11-270-27.[Eff 6/18/94; am 3/13/99; comp] (Auth: HRS §§ 342J-4, 342J-31, 342J-35) (Imp: 40 C.F.R. §270.16 )