Current through Rules and Regulations filed through November 22, 2024
Rule 40-20-1-.07 - Test Measures: Fill Pipe(1) In testing measuring devices, it is necessary for the Inspector to draw from each pump sufficient product to determine the accuracy of the dispensing device.(2) For this purpose, official and approved one-gallon, five-gallon, and metric measuring cans are used. In order that the Inspector may dispose of the product in the test measure, it is hereby made an obligation of the owner or operator of the station to provide containers of sufficient quantity into which the Inspector may empty the product from his test measure in the event that ground level storage tank fill pipes are not present.(3) If the design, construction, or location of any device is such as to require a testing procedure involving special equipment, or accessories or an abnormal amount of labor, such equipment, accessories and labor shall be supplied by the owner or operator of the device as required by the weights and measures official.Ga. Comp. R. & Regs. R. 40-20-1-.07
O.C.G.A. Secs. 10-1-148, 10-1-151, 10-1-155, 10-1-161.
Original Rule entitled "No. 1 Diesel Fuel Oil" was filed on August 8, 1972; effective August 28, 1972.Amended: Rule repealed and a new Rule of the same title adopted. Filed October 31, 1980; effective November 20, 1980.Amended: Rule repealed and a new Rule entitled "Test Measures: Fill Pipe" adopted. Filed September 13, 1983; effective October 3, 1983.