(a) The waiver of advance estimate form may be a separate document or may be incorporated in a work authorization form.(b) If separate, such form shall be not less than 41/4inches by 5 inches. The heading shall be bold face type in capital letters not smaller than 18 point in size and the body copy shall be regular or medium face type style not smaller than 12 point in size. In the event the motor vehicle repair shop finds that the cost of the required work will exceed that amount authorized in the waiver and subsequently secures consent for such work, a work authorization as provided for in section 2 of public act no. 80-425 shal completed. Such authorization may be incorporated in the "Waiver of Advance Estimate" form.(c) If incorporated in a work authorization, such form shall be contained in a separate block not less than 11/2inches by 3 inches. The heading shall be bold face type in capital letters not smaller than 8 point in size and the body copy shall be regular or medium face type style not smaller than 8 point in size.(d) Each motor vehicle shall be identified in the "Waiver of Advance Estimate" by at least its model year, make or model and identification number. If the "Waiver of Advance Estimate" is incorporated in the work authorization form and there is provision on such form in another prominent area providing for the required motor vehicle identification information which has been properly completed, the words "incorporated by reference" or the notation "I/R" may be inserted in place of the required vehicle identification information on the waiver.Conn. Agencies Regs. § 14-65d-5
Effective November 26, 1980