Conn. Agencies Regs. § 11-8-21

Current through October 16, 2024
Section 11-8-21 - Map standards
(a) Maps or plans bearing a date of October 1, 1974 or later, submitted to the town clerk, shall be of a process approved by the public records administrator and the process shall be identified by the producer on the map submitted.
(b) Maps or plans presented to town clerks for filing on or after January 1, 1992 shall be produced by one of the following processes:
1) wash-off photographic polyester film,
2) fixed line photographic polyester film,
3) original ink drawing on polyester film or linen. The Office of the Public Records Administrator shall have the authority to revise these accepted processes periodically, and shall maintain a current list of approved reprographic processes for filing requirements for maps.
(c) Maps or plans presented to town clerks for filing on or after January 1, 1992 shall be identified as to the reproduction process used by the producer, e.g., "wash-off" or "fixed line photographic." This process will be certified by a live stamp applied by the producer. This stamp will be affixed with indelible red ink. The stamp shall include the name of the producer and the process used. It shall measure 1? x 2?. Original ink drawings will be so identified using the same process described above.
(d) The thickness of the material on which maps or plans are drawn or reproduced shall be no less than .003. The polyester shall be either matte on one side or matte on both sides.
(e) The public records administrator shall notify the State Board of Examiners for Professional Engineers and Land Surveyors and other concerned agencies as to which materials and photographic processes are acceptable for maps that are submitted for filing and preservation.
(f) Maps or plans presented for record and preservation shall not be accepted if any part is attached/glued to its surface. The legibility of all data reflected on any map or plans filed for record and preservation shall be beyond question. Maps or plans presented for filing with illegible or questionable images shall be rejected.
(g) The size of maps or plans filed for record in the office of the town clerk shall conform with the requirements set forth in Section 7-31 of the General Statutes.
(h) Each map, plan, drawing, or specification shall contain a live seal or live stamp of the design professional within whose area of expertise or professional discipline the document falls.
(i) Security film of maps or plans placed on file in the office of the town clerk shall be required and stored in a manner similar to security film of deeds. Photographic reproduction must be provided pursuant to Section 7-31 of the General Statutes.

Conn. Agencies Regs. § 11-8-21

Effective November 25, 1991; Amended January 28, 2010