Subsection 110.R4.2 - REGISTRATION STAMP110.R4.2.1Issuance. Each person registered by the BBRS shall be issued a specific name and number for use in stamping or certifying the native lumber produced at a specific mill.110.R4.2.2Contents. Each stamp shall be a minimum of two inches by four inches with a minimum of 36 pt. letters and shall contain the following information: 1. Name of native lumber producer;2. Registration number; and3. Species of wood. Each producer shall be responsible for obtaining stamps made for their use in accordance with the requirements of the BBRS and 780 CMR 110.R4.
110.R4.2.3Use. Each piece of native lumber shall be stamped with the name and registration number of the producer in accordance with 780 CMR 110.R4 and bear an approved mark identifying the species of wood. In lieu of stamping, a certification bearing the same stamped information may be provided by the producer for precut or re-manufactured lumber in accordance with 780 CMR 110.R4.110.R4.2.4Unlawful Use. It shall be unlawful to use a stamp registered for a specific mill at any other mill.780 CMR, ch. 110.00, 780 CMR 110R4, 110.R4.2
Amended by Mass Register Issue 1532, eff. 10/11/2024.