Section 30.105 - Exemption for PCB Wastes Regulated Pursuant to Toxic Substances Control Act(1) PCB waste, as defined in 40 CFR 761.3, consisting of dielectric fluid or electrical equipment containing dielectric fluid that would be subject to hazardous waste regulation due to the presence of PCBs are exempt from 310 CMR 30.000 provided:(a) the waste is regulated pursuant to 40 CFR 761, as in effect on July 1, 2002;(b) the waste does not meet the description of any listing (see , e.g., 310 CMR 30.131 describing MA01 and MA02); and(c) the waste is hazardous solely because it exhibits the Toxicity Characteristic (D018 -D043 only).(2) PCB waste, as defined in 40 CFR 761.3, consisting of dielectric fluid or electrical equipment containing dielectric fluid that is subject to hazardous waste regulation due to the presence of PCBs need only be managed and identified using the appropriate Massachusetts hazardous waste number(s) provided:(a) the waste is regulated pursuant to 40 CFR 761, as in effect on July 1, 2002;(b) the waste does not meet the description of an F, K, U or P listed waste; and(c) the only applicable EPA Hazardous waste codes are D018 - D043.Amended by Mass Register Issue 1404, eff. 11/15/2019.Amended by Mass Register Issue 1522, eff. 5/24/2024.