Section 37.41 - Security plan(a)In General. States must have a security plan that addresses the provisions in paragraph (b) of this section and must submit the security plan as part of its REAL ID certification under § 37.55 .(b) Security plan contents. At a minimum, the security plan must address-(1) Physical security for the following:(i) Facilities used to produce driver's licenses and identification cards.(ii) Storage areas for card stock and other materials used in card production.(2) Security of personally identifiable information maintained at DMV locations involved in the enrollment, issuance, manufacture and/or production of cards issued under the REAL ID Act, including, but not limited to, providing the following protections: (i) Reasonable administrative, technical, and physical safeguards to protect the security, confidentiality, and integrity of the personally identifiable information collected, stored, and maintained in DMV records and information systems for purposes of complying with the REAL ID Act. These safeguards must include procedures to prevent unauthorized access, use, or dissemination of applicant information and images of source documents retained pursuant to the Act and standards and procedures for document retention and destruction.(ii) A privacy policy regarding the personally identifiable information collected and maintained by the DMV pursuant to the REAL ID Act.(iii) Any release or use of personal information collected and maintained by the DMV pursuant to the REAL ID Act must comply with the requirements of the Driver's Privacy Protection Act, 18 U.S.C. 2721 et seq. State plans may go beyond these minimum privacy requirements to provide greater protection, and such protections are not subject to review by DHS for purposes of determining compliance with this part.(3) Document and physical security features for the card, consistent with the requirements of § 37.15 , including a description of the State's use of biometrics, and the technical standard utilized, if any;(4) Access control, including the following:(i) Employee identification and credentialing, including access badges.(ii) Employee background checks, in accordance with § 37.45 of this part.(iii) Controlled access systems.(5) Periodic training requirements in-(i) Fraudulent document recognition training for all covered employees handling source documents or engaged in the issuance of driver's licenses and identification cards. The fraudulent document training program approved by AAMVA or other DHS approved method satisfies the requirement of this subsection.(ii) Security awareness training, including threat identification and handling of SSI as necessary.(6) Emergency/incident response plan;(7) Internal audit controls;(8) An affirmation that the State possesses both the authority and the means to produce, revise, expunge, and protect the confidentiality of REAL ID driver's licenses or identification cards issued in support of Federal, State, or local criminal justice agencies or similar programs that require special licensing or identification to safeguard persons or support their official duties. These procedures must be designed in coordination with the key requesting authorities to ensure that the procedures are effective and to prevent conflicting or inconsistent requests. In order to safeguard the identities of individuals, these procedures should not be discussed in the plan and States should make every effort to prevent disclosure to those without a need to know about either this confidential procedure or any substantive information that may compromise the confidentiality of these operations. The appropriate law enforcement official and United States Attorney should be notified of any action seeking information that could compromise Federal law enforcement interests.(c)Handling of Security Plan. The Security Plan required by this section contains Sensitive Security Information (SSI) and must be handled and protected in accordance with 49 CFR part 1520.