Section 71.65-5 - Plans and specifications required for new construction(a)General.(2) General Arrangement Plan of decks, holds, inner bottoms, etc., and including inboard and outboard profile.(b)Hull structure. /[GREATER THAN] (1) *Inner Bottom Plating and Framing.(3) *Shell Plating and Framing.(4) *Stem, Stern Frame, and Rudder.(5) *Structural Deck Plans for Strength Decks.(6) *Pillars and Girders.(7) *Watertight and Oiltight Bulkheads.(8) *Foundations for Main Machinery and Boilers.(9) *Arrangement of Ports, Doors, and Airports in Shell Plating.(10) *Hatch Coamings and Covers in Weather and Watertight Decks.(11) *Details of Hinged Subdivision Watertight Doors and Operating Gear.(12) *Scuppers and Drains Penetrating Shell Plating.(13) *Arrangement of the cargo gear including a stress diagram. The principal details of the gear and the safe working load for each component part shall be shown.(c)Subdivision and stability. Plans and calculations required by subchapter S of this chapter.(d)Fire control.(1) Fire control diagram showing location and type of all required fire-screen insulation, including main fire zone and subdivisions, stairway and elevator enclosures, control space enclosures, etc., and type of all doors in such subdivisions and enclosures.(2) Comprehensive typical details of fire-screen insulation of both vertical and horizontal surfaces, including deck coverings where used, keyed by reference numbers to the "fire control diagram".(3) Ventilation diagram including dampers and other fire control features.(6) Extinguishing systems, including fire main, carbon dioxide, clean agent, foam, and sprinkling systems.(7) Supervised Patrol Route.(e)Marine engineering.(1) For plans required for marine engineering equipment and systems, see subchapter F (Marine Engineering) of this chapter.(f)Electrical engineering.(1) For plans required for electrical engineering equipment and systems, see subchapter J (Electrical Engineering) of this chapter.(g)Lifesaving equipment.(1) These plans are to show the location and arrangement of embarkation decks, all overboard discharges and projections in way of launching lifeboats, weights of lifeboats fully equipped and loaded, working loads of davits and winches, types and sizes of falls, the manufacturer's name and identification for all equipment, and all other relevant and necessary information.(i) Arrangement of lifeboats.(ii) Arrangement of davits.(iii) Location and stowage of liferafts and buoyant apparatus.(h)Crew's accommodations.(1) Arrangement plans showing accommodations, ventilation, escapes, hospital, and sanitary facilities for all crewmembers.(i)Navigation bridge visibility. For vessels of 100 meters (328 feet) or more in length contracted for on or after September 7, 1990, a plan must be included which shows how visibility from the navigation bridge will meet the standards contained in § 72.04-1 of this subchapter.CGFR 65-50, 30 FR 16895, Dec. 30, 1965, as amended by CGD 79-023, 48 FR 51007, Nov. 4, 1983; CGD 85-099, 55 FR 32247, Aug. 8, 1990; CGD 88-032, 56 FR 35824, July 29, 1991; USCG-2006-24797, 77 FR 33875 , June 7, 2012