Section 201.1 - [Effective 12/18/2025] Drugs; name and place of business of manufacturer, packer, or distributor(a) A drug or drug product (as defined in § 320.1 of this chapter) in finished package form is misbranded under section 502 (a) and (b)(1) of the act if its label does not bear conspicuously the name and place of business of the manufacturer, packer, or distributor. This paragraph does not apply to any drug or drug product dispensed in accordance with section 503(b)(1) of the act.(b) As used in this section, and for purposes of section 502(a) and (b)(1) of the Federal Food, Drug, and Cosmetic Act, the manufacturer of a drug product is the person who performs all of the following operations that are required to produce the product: (10) Filling sterile or aerosol drugs into dispensing containers; and(11) With respect to a medical gas, fabricating the gas by chemical reaction, physical separation, compression of atmospheric air, purification (e.g., re-processing an industrial gas into a medical gas), combining two or more distinct medical gases, or other process.(c) If no person performs all of the applicable operations listed in paragraph (b) of this section, no person may be represented as manufacturer except as follows: (1) If the person performs more than one half of the applicable operations listed in paragraph (b) of this section and acknowledges the contribution of other persons who have performed the remaining applicable operations by stating on the product label that "Certain manufacturing operations have been performed by other firms."; or(2) If the person performs at least one applicable operation listed in paragraph (b) of this section and identifies by appropriate designation all other persons who have performed the remaining applicable operations, e.g., "Made by (Person A), Filled by (Person B), Sterilized by (Person C)"; or(3) If the person performs at least one applicable operation listed in paragraph (b) of this section and the person is listed along with all other persons who have performed the remaining applicable operations as "joint manufacturers." A list of joint manufacturers shall be qualified by the phrase "Jointly Manufactured By ______," and the names of all of the manufacturers shall be printed together in the same type size and style; or(4) If the person performs all applicable operations listed in paragraph (b) of this section except for those operations listed in paragraph (d) of this section. For purposes of this paragraph, person, when it identifies a corporation, includes a parent, subsidiary, or affiliate company where the related companies are under common ownership and control.(d) The Food and Drug Administration finds that it is the common practice in the drug industry to contract out the performance of certain manufacturing operations listed in paragraph (b) of this section. These operations include: (1) Soft-gelatin encapsulating,(3) sterilizing by irradiation,(5) ethylene oxide sterilization.(e) A person performs an operation listed in paragraph (b) of this section only if the operation is performed, including the performance of the appropriate in-process quality control operations, except laboratory testing of samples taken during processing, as follows:(1) By individuals, a majority of whom are employees of the person and, throughout the performance of the operation, are subject to the person's direction and control;(2) On premises that are continuously owned or leased by the person and subject to the person's direction and control; and(3) On equipment that is continuously owned or leased by the person. As used in this paragraph, person, when it identifies a corporation, includes a parent, subsidiary, or affiliate company where the related companies are under common ownership and control.(f) The name of the person represented as manufacturer under paragraph (b) or (c) of this section must be the same as either(1) the name of the establishment (as defined in § 207.1 of this chapter) under which that person is registered at the time the labeled product is produced or(2) the registered establishment name of a parent, subsidiary, or affiliate company where the related companies are under common ownership and control. In addition, the name shall meet the requirements of paragraph (g) of this section.(g) The requirement for declaration of the name of the manufacturer, packer, or distributor shall be deemed to be satisfied, in the case of a corporate person, only by the actual corporate name, except that the corporate name may be the name of a parent, subsidiary, or affiliate company where the related companies are under common ownership and control. The corporate name may be preceded or followed by the name of the particular division of the corporation. "Company," "Incorporated," etc., may be abbreviated or omitted and "The" may be omitted. In the case of an individual, partnership, or association, the name under which the business is conducted shall be used.(h)(1) Except as provided in this section, no person other than the manufacturer, packer, or distributor may be identified on the label of a drug or drug product.(2) The appearance on a drug product label of a person's name without qualification is a representation that the named person is the sole manufacturer of the product. That representation is false and misleading, and the drug product is misbranded under section 502(a) of the act, if the person is not the manufacturer of the product in accordance with this section.(3) If the names of two or more persons appear on the label of a drug or drug product, the label may identify which of the persons is to be contacted for further information about the product.(4) If a trademark appears on the drug or drug product label or appears as a mark directly on the drug product (e.g., tablet or capsule), the label may identify the holder or licensee of the trademark. The label may also state whether the person identified holds the trademark or is licensee of the trademark.(5) If the distributor is named on the label, the name shall be qualified by one of the following phrases: "Manufactured for ______", "Distributed by ______", "Manufactured by ______ for ______", "Manufactured for _____by _____", "Distributor: ______", "Marketed by ______". The qualifying phrases may be abbreviated.(6) If the packer is identified on the label, the name shall be qualified by the phrase "Packed by ______" or "Packaged by ______". The qualifying phrases may be abbreviated.(i) The statement of the place of business shall include the street address, city, State, and ZIP Code. For a foreign manufacturer, the statement of the place of business shall include the street address, city, country, and any applicable mailing code. The street address may be omitted if it is shown in a current city directory or telephone directory. The requirement for inclusion of the ZIP Code shall apply to consumer commodity labels developed or revised after July 1, 1969. In the case of nonconsumer packages, the ZIP Code shall appear either on the label or the labeling (including the invoice).(j) If a person manufactures, packs, or distributes a drug or drug product at a place other than the person's principal place of business, the label may state the principal place of business in lieu of the actual place where such drug or drug product was manufactured or packed or is to be distributed, unless such statement would be misleading.(k) Paragraphs (b), (c), (d), (e), and (f) of this section, do not apply to the labeling of drug components.(l) A drug product is misbranded under section 502(a) of the act if its labeling identifies a person as manufacturer, packer, or distributor, and that identification does not meet the requirements of this section.(m) This section does not apply to biological drug products that are subject to the requirements of section 351 of the Public Health Service Act, 42 U.S.C. 262 .45 FR 25775, Apr. 15, 1980; 45 FR 72118, Oct. 31, 1980, as amended at 48 FR 37620, Aug. 19, 1983; 81 FR 60212 , Aug. 31, 2016