Current through November 30, 2024
Section 2.802 - Petition for rulemaking-requirements for filing(a)Filing a petition for rulemaking. Any person may petition the Commission to issue, amend, or rescind any regulation in 10 CFR chapter I. The petition for rulemaking should be addressed to the Secretary, Attention: Rulemakings and Adjudications Staff, and sent by mail addressed to the U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; by email to Rulemaking. Comments@nrc.gov; or by hand delivery to 11555 Rockville Pike, Rockville, Maryland 20852, between 7:30 a.m. and 4:15 p.m. (Eastern time) on Federal workdays.(b)Consultation with the NRC. A petitioner may consult with the NRC staff before and after filing a petition for rulemaking by contacting the Chief, Regulatory Analysis and Rulemaking Support Branch, Division of Rulemaking, Environmental, and Financial Support, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; telephone: 1-800-368-5642.(1) In any consultation regarding the drafting or amendment of a petition for rulemaking, the assistance that the NRC staff may provide is limited to the following: (i) Describing the process for filing, docketing, tracking, closing, amending, withdrawing, and resolving a petition for rulemaking;(ii) Clarifying an existing NRC regulation and the basis for the regulation; and(iii) Assisting the petitioner to clarify a petition for rulemaking so that the Commission is able to understand the issues of concern to the petitioner.(2) In any consultation regarding the drafting or amendment of a petition for rulemaking, in providing the assistance permitted in paragraph (b)(1) of this section, the NRC staff will not draft or develop text or alternative approaches to address matters in the petition for rulemaking.(3) In any consultation regarding a petition for rulemaking, the NRC staff will not advise a petitioner on whether a petition should be amended or withdrawn.(c)Content of petition.(1) Each petition for rulemaking filed under this section must clearly and concisely:(i) Specify the name of the petitioner, a telephone number, a mailing address, and an email address (if available) that the NRC may use to communicate with the petitioner;(ii) If the petitioner is an organization, provide additional identifying information (as applicable) including the petitioner's organizational or corporate status, the petitioner's State of incorporation, the petitioner's registered agent, and the name and authority of the individual who signed the petition on behalf of the organizational or corporate petitioner.(iii) Present the specific problems or issues that the petitioner believes should be addressed through rulemaking, including any specific circumstances in which the NRC's codified requirements are incorrect, incomplete, inadequate, or unnecessarily burdensome;(iv) Cite, enclose, or reference publicly-available technical, scientific, or other data or information supporting the petitioner's assertion of the problems or issues;(v) Present the petitioner's proposed solution to the problems or issues raised in the petition for rulemaking (e.g., a proposed solution may include specific regulations or regulatory language to add to, amend in, or delete from 10 CFR chapter I);(vi) Provide an analysis, discussion, or argument that explains how the petitioner's proposed solution solves the problems or issues identified by the petitioner; and(vii) Cite, enclose, or reference any other publicly-available data or information supporting the petitioner's proposed solution; and(viii) If required by 10 CFR 51.68 of this chapter, submit a separate document entitled "Petitioner's Environmental Report," which contains the information specified in 10 CFR 51.45 .(2) To assist the NRC in its evaluation of the petition for rulemaking, the petitioner should clearly and concisely: (i) Explain why the proposed rulemaking solution is within the authority of the NRC to adopt; and(ii) Explain why rulemaking is the most favorable approach to address the problem or issue, as opposed to other NRC actions such as licensing, issuance of an order, or referral to another Federal or State agency.(3) If the petition is signed by multiple petitioners, the petition must designate a lead petitioner who is responsible for disseminating communications received from the NRC to co-petitioners.(e)Request for suspension of an adjudication involving licensing. The petitioner may request the Commission to suspend all or any part of any licensing proceeding to which the petitioner is a participant pending disposition of the petition for rulemaking.(f)Amendment; withdrawal. If the petitioner wants to amend or withdraw a docketed petition for rulemaking, then the petitioner should include the docket number and the date that the original petition for rulemaking was submitted in a filing addressed to the Secretary, Attention: Rulemakings and Adjudications Staff, and sent by mail addressed to the U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; or by email to Rulemaking. Comments@nrc.gov. 80 FR 60526 , Oct. 7, 2015, as amended at 83 FR 30287 , June 28, 2018; 84 FR 65644 , Nov. 29, 2019 83 FR 30287 , 7/30/2018; 84 FR 65644 , 12/30/2019