Section 1354 - MH-Unit Gas Connector(a) Each MH-unit shall be connected to the lot outlet by an approved flexible gas connector, listed for its intended use, not more than six (6) feet in length and of adequate size to supply the MH-unit gas appliance demand, as evidenced by the label on the MH-unit. In the absence of a label, the MH-unit demand shall be determined by the California Plumbing Code, Chapter 12.(b) When the MH-unit gas system needs to be extended, the extension must comply with National Manufactured Housing Construction and Safety Standards. Verification of compliance will be completed at the time of the installation inspection.(c) Only one (1) gas supply connection to an MH-unit for each dwelling unit shall be permitted.Cal. Code Regs. Tit. 25, § 1354
1. Amendment of subsection (a) and new subsection (d) filed 8-22-85; effective upon filing pursuant to Government Code Section 11346.2(d) (Register 85, No. 36).
2. Amendment of section heading and section filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28). Note: Authority cited: Sections 18300 and 18613, Health and Safety Code. Reference: Sections 18550 and 18613, Health and Safety Code.
1. Amendment of subsection (a) and new subsection (d) filed 8-22-85; effective upon filing pursuant to Government Code Section 11346.2(d) (Register 85, No. 36).
2. Amendment of section heading and section filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28).