Section 94204 - Certification Procedure(a) Each application for certification and the fee as specified in section 94210 shall be submitted in a format approved by the Executive Officer and include, at a minimum, the following information:(1) name of the Applicant, a contact person, mailing address (street and electronic), and telephone number;(2) a description of the DG Unit and model number;(3) maximum output rating (kilowatt);(4) fuel type and analysis for which certification is being sought;(5) type or description of any emission control equipment used;(6) listing of components of the DG Unit most critical to ensuring continued compliance with the emission limits (such as fuel injectors, rotors, seals and bearings for a microturbine and fuel cell stacks and catalysts for fuel cells); and,(7) emission test data, supporting calculations, quality control/assurance information, and all other information needed to demonstrate compliance with the requirements in sections 94203(a) through (d).(b) Within 30 calendar days of receipt of an application, the Executive Officer shall inform the Applicant in writing if the application is complete or deficient. If deemed deficient, the Executive Officer shall identify the specific information required to make the application complete.(c) Within 60 calendar days of the application being deemed complete, the Executive Officer shall issue or deny certification.(d) Upon finding that a DG Unit meets the requirements of this article, the Executive Officer shall issue an Executive Order of Certification for the DG Unit. The Executive Officer shall provide a copy of the Executive Order of Certification to the Applicant.Cal. Code Regs. Tit. 17, § 94204
1. New section filed 9-4-2002; operative 10-4-2002 (Register 2002, No. 36).
2. Amendment of subsection (a)(4), new subsection (a)(6), subsection renumbering and amendment of newly designated subsection (a)(7) filed 8-8-2007; operative 9-7-2007 (Register 2007, No. 32). Note: Authority cited: Sections 39600, 39601 and 41514.9, Health and Safety Code. Reference: Section 41514.9, Health and Safety Code.
1. New section filed 9-4-2002; operative 10-4-2002 (Register 2002, No. 36).
2. Amendment of subsection (a)(4), new subsection (a)(6), subsection renumbering and amendment of newly designated subsection (a)(7) filed 8-8-2007; operative 9-7-2007 (Register 2007, No. 32).