Statutes, codes, and regulations
California Code Of Regulations
Title 14 - Natural ResourcesDivision 1.5 - Department of Forestry and Fire ProtectionChapter 4 - Forest PracticesSubchapter 7 - Administration
Article 5 - Standardized Stocking Sampling Procedures
Section 1072.7 - Combination Stocking Sampling Procedure

Cal. Code Regs. tit. 14 § 1072.7

Download
PDF
Current through Register 2024 Notice Reg. No. 49, December 6, 2024
Section 1072.7 - Combination Stocking Sampling Procedure

The procedure is used where the silvicultural Rules of each forest District and the Act allow the Stocking Standards to be met through combination of point count and basal area. The following procedure shall be used to determine if these Stocking Standards have been met: At each plot center the Timber Owner or agent thereof shall check for either basal area or Countable Trees. The same basal area factor shall be used on all plots in the sample. If the plot is not stocked with Countable Trees as specified in 14 CCR § 1072.5, it shall be necessary to sample for Countable Trees as specified in 14 CCR § 1072.6.

Cal. Code Regs. Tit. 14, § 1072.7

1. Change without regulatory effect amending section filed 10-31-2017 pursuant to section 100, title 1, California Code of Regulations (Register 2017, No. 44).

Note: Authority cited: Sections 4551 and 4587, Public Resources Code. Reference: Section 4587, Public Resources Code.

1. Change without regulatory effect amending section filed 10-31-2017 pursuant to section 100, title 1, California Code of Regulations (Register 2017, No. 44).