Section 17 AAC 90.910 - Metrology laboratory fees(a) The owner of an artifact or device who submits it to the state metrology laboratory for testing, calibration, or certification shall pay the department a fee for the following testing and certification services: (1) for mass measurement services: (A) for class F weight sets: $300 per set;(B) for 25-pound class F weights: $50 per weight;(C) for 50-pound class F weights: $50 per weight;(D) for 500-pound class F weights: $75 per weight;(E) for 1,000-pound class F weights: $75 per weight;(F) for adjustment of ma ss measurement artifacts or devices, if out of tolerance: $85 per hour;(2) for volumetric measurement services:(A) for five-gallon test measures: $75 per test measure;(B) for provers over five gallons and up to and including 100 gallons: $200 per prover;(C) for provers over 100 gallons up to and including 500 gallons: $600 per prover;(D) for provers over 500 gallons up to and including 1,500 gallons: $1,200 per prover;(E) for liquid propane gas (LPG) provers up to and including 100 gallons, $400 per prover ;(3) for electric meters: (A) for residential electric meters: $150 per device;(B) for industrial electric meters: $150 per device;(4) for speed detection devices: (A) for single tuning forks: $30 per fork;(B) for a lidar device: $150 per device;(5) for miscellaneous artifacts, devices, or services: (A) for wheel load weighers: $85 per unit;(B) for adjustments: $85 per hour;(C) for thermometry: $85 per hour;(6) for services of the state metrology lab, other than those specified in (1) - (5) of this subsection: $85 per hour.(b) In addition to the applicable fees specified in (a) of this section, the owner of the device or artifact shall pay all mailing and shipping expenses.Eff. 7/9/2000, Register 155; am 1/18/2002, Register 161; am 4/9/2016, Register 218, July 2016; am 5/5/2018,Register 226, July 2018Authority:AS 45.75.040
AS 45.75.050
AS 45.75.070
AS 45.75.080