Brass Rod From the Republic of Korea: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures

Download PDF
Federal RegisterDec 1, 2023
88 Fed. Reg. 83915 (Dec. 1, 2023)

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) preliminarily determines that brass rod from the Republic of Korea (Korea) is being, or likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is April 1, 2022, through March 31, 2023. Interested parties are invited to comment on this preliminary determination.

DATES:

Applicable December 1, 2023.

FOR FURTHER INFORMATION CONTACT:

Krisha Hill or Drew Jackson, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4037 or (202) 482–4406, respectively.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). Commerce published the notice of initiation of this investigation on May 24, 2023. On September 8, 2023, Commerce postponed the preliminary determination of this investigation until November 24, 2023.

See Brass Rod from Brazil, India, Israel, Mexico, the Republic of Korea, and South Africa: Initiation of Less-Than-Fair-Value Investigations, 88 FR 33575 (May 24, 2023) ( Initiation Notice).

See Brass Rod from Brazil, India, Israel, Mexico, the Republic of Korea, and South Africa: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations, 88 FR 62054 (September 8, 2023).

For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov . In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/public/FRNoticesListLayout.aspx .

See Memorandum, “Decision Memorandum for the Preliminary Affirmative Determination of Sales at Less Than Fair Value in the Investigation of Brass Rod from the Republic of Korea,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

Scope of the Investigation

The product covered by this investigation is brass rod from Korea. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations, in the Initiation Notice Commerce set aside a period of time for parties to raise issues regarding product coverage ( i.e., scope). Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of the product coverage comments and rebuttal responses submitted to the record for this investigation and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. As discussed in the Preliminary Scope Decision Memorandum, Commerce preliminarily modified, in one respect, the scope language that appeared in the Initiation Notice. The scope in Appendix I reflects the modification.

See Antidumping Duties; Countervailing Duties, Final Rule,62 FR 27296, 27323 (May 19, 1997).

See Initiation Notice, 88 FR at 33576.

See Memorandum, “Less-Than-Fair-Value Investigations of Brass Rod from Brazil, India, Israel, Mexico, the Republic of Korea, and South Africa and Countervailing Duty Investigations of Brass Rod from India, Israel, and the Republic of Korea: Preliminary Scope Decision Memorandum,” dated September 25, 2023 (Preliminary Scope Decision Memorandum).

In the Preliminary Scope Decision Memorandum, Commerce established the deadline for parties to submit scope case and rebuttal briefs. Commerce intends to issue a final scope decision along with the final determination in the concurrent countervailing duty investigation of brass rod from India, currently due on December 11, 2023.

Case briefs, other written comments, and rebuttal briefs submitted by parties in response to this preliminary LTFV determination should not include scope-related issues. See Preliminary Scope Decision Memorandum and “Public Comment” section of this notice.

Methodology

Commerce is conducting this investigation in accordance with section 731 of the Act. Commerce calculated export prices and constructed export prices in accordance with section 772(a) and (b) of the Act. Normal value is calculated in accordance with section 773 of the Act. For a full description of the methodology underlying the preliminary determination, see the Preliminary Decision Memorandum.

All-Others Rate

Sections 733(d)(1)(A)(ii) and 735(c)(5)(A) of the Act provide that in the preliminary determination Commerce shall determine an estimated all-others rate for all exporters and producers not individually examined. This rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act.

In this investigation, Commerce calculated estimated weighted-average dumping margins that are above de minimis for the mandatory respondents, Booyoung Industry and Daechang Co., Ltd. (Daechang). Commerce calculated the all-others rate by weight-averaging the estimated weighted-average dumping margins that it calculated for the individually examined respondents. Commerce weight-averaged these dumping margins using the publicly ranged total quantities of each respondent's sales of subject merchandise to the United States during the POI.

With two respondents under examination, Commerce normally calculates (A) a weighted-average of the estimated weighted-average dumping margins calculated for the examined respondents; (B) a simple average of the estimated weighted-average dumping margins calculated for the examined respondents; and (C) a weighted-average of the estimated weighted-average dumping margins calculated for the examined respondents using each company's publicly ranged U.S. sale quantities for the merchandise under consideration. Commerce then compares (B) and (C) to (A) and selects the rate closer to (A) as the most appropriate rate for all other producers and exporters. See Ball Bearings and Parts Thereof from France, Germany, Italy, Japan, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Final Results of Changed-Circumstances Review, and Revocation of an Order in Part,75 FR 53661, 53663 (September 1, 2010), and accompanying Issues and Decision Memorandum at Comment 1; see also Memorandum, “All-Others Rate Calculation,” dated concurrently with this notice.

Preliminary Determination

Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:

Exporter/producer Weighted- average dumping margin (percent) Cash deposit rate (adjusted for subsidy offset(s) (percent)
Booyoung Industry 10.52 10.52
Daechang Co., Ltd./Seowon Co. Ltd./Affiliate A 9.01 8.85
All Others 9.36 9.20

Commerce preliminarily determines that Daechang Co., Ltd., Seowon Co. Ltd., and Affiliate A are a single entity. For further discussion, see Preliminary Decision Memorandum; see also Memorandum, “Preliminary Affiliation and Collapsing Analysis Memorandum Daechang Co., Ltd., Seowon Co. Ltd., and Affiliate A,” dated concurrently with this notice. Daechang requested business proprietary treatment for Affiliate A. Commerce is continuing to evaluate the request for proprietary treatment and intends to make a determination regarding the public disclosure of this entity's name before the final determination.

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register .

Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate, as follows: (1) the cash deposit rates for the respondents listed above will be equal to the company-specific estimated weighted-average dumping margins determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin.

Disclosure

Commerce intends to disclose its calculations and analysis performed to interested parties in this preliminary determination within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice in the Federal Register , in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments on non-scope issues may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs. Interested parties who submit case briefs or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities.

See19 CFR 351.309(c)(1)(i); see also19 CFR 351.303 (for general filing requirements).

See19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 2023).

See 19 351.309(c)(2) and (d)(2).

As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their brief that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs. Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).

We use the term “issue” here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.

See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings; Final Rule, 88 FR 67069 (September 29, 2023).

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice in the Federal Register . Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination in the Federal Register if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of Commerce's regulations requires that a request by an exporter for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

See19 CFR 351.210(e)(2).

On November 8 and 14, 2023, pursuant to 19 CFR 351.210(e), Booyoung Industry and Daechang, respectively, requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months. In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporters accounts for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination in the Federal Register .

See Booyoung Industry's Letter, “Request for Extension of Final Determination,” dated November 8, 2023; see also Daechang's Letter, “Request to Extend the Deadline for the Final Determination,” dated November 14, 2023.

U.S. International Trade Commission Notification

In accordance with section 733(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its preliminary determination. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether these imports of brass rod from Korea are materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

This preliminary determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act, and 19 CFR 351.205(c).

Dated: November 24, 2023.

Abdelali Elouaradia,

Deputy Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

The products covered by this investigation are brass rod and bar (brass rod), which is defined as leaded, low-lead, and no-lead solid brass made from alloys such as, but not limited to the following alloys classified under the Unified Numbering System (UNS) as C27450, C27451, C27460, C34500, C35000, C35300, C35330, C36000, C36300, C37000, C37700, C48500, C67300, C67600, and C69300, and their international equivalents.

The brass rod subject to this investigation has an actual cross-section or outside diameter greater than 0.25 inches but less than or equal to 12 inches. Brass rod cross-sections may be round, hexagonal, square, or octagonal shapes as well as special profiles ( e.g., angles, shapes), including hollow profiles.

Standard leaded brass rod covered by the scope contains, by weight, 57.0–65.0 percent copper; 0.5–3.0 percent lead; no more than 1.3 percent iron; and at least 15 percent zinc. No-lead or low-lead brass rod covered by the scope contains by weight 59.0–76.0 percent copper; 0–1.5 percent lead; no more than 0.35 percent iron; and at least 15 percent zinc. Brass rod may also include other chemical elements ( e.g., nickel, phosphorous, silicon, tin, etc.).

Brass rod may be in straight lengths or coils. Brass rod covered by these investigations may be finished or unfinished, and may or may not be heated, extruded, pickled, or cold-drawn. Brass rod may be produced in accordance with ASTM B16, ASTM B124, ASTM B981, ASTM B371, ASTM B453, ASTM B21, ASTM B138, and ASTM B927, but such conformity to an ASTM standard is not required for the merchandise to be included within the scope.

Excluded from the scope of this investigation is brass ingot, which is a casting of unwrought metal unsuitable for conversion into brass rod without remelting, that contains, by weight, at least 57.0 percent copper and 15.0 percent zinc.

The merchandise covered by this investigation is currently classifiable under subheadings 7407.21.9000, 7407.21.7000, and 7407.21.1500 of the Harmonized Tariff Schedule of the United States (HTSUS). Products subject to the scope may also enter under HTSUS subheadings 7403.21.0000, 7407.21.3000, and 7407.21.5000. The HTSUS subheadings and UNS alloy designations are provided for convenience and customs purposes. The written description of the scope of the investigations is dispositive.

Appendix II

List of Sections in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope of Investigation

V. Affiliation/Single Entity

VI. Discussion of the Methodology

VII. Currency Conversion

VIII. Adjustments to Cash Deposit Rates for Export Subsidies in Companion Countervailing Duty Investigation

IX. Recommendation

[FR Doc. 2023–26415 Filed 11–30–23; 8:45 am]

BILLING CODE 3510–DS–P