Notwithstanding any other provision of law, within 90 days after August 14, 2008, the Commission shall publish in the Federal Register as a mandatory consumer product safety standard the American National Standard for Four Wheel All-Terrain Vehicles Equipment Configuration, and Performance Requirements developed by the Specialty Vehicle Institute of America (American National Standard ANSI/SVIA-1-2007). The standard shall take effect 150 days after it is published.
After the standard takes effect, it shall be unlawful for any manufacturer or distributor to import into or distribute in commerce in the United States any new assembled or unassembled all-terrain vehicle unless-
The failure to comply with any requirement of paragraph (2) shall be deemed to be a failure to comply with a consumer product safety standard under this chapter and subject to all of the penalties and remedies available under this chapter.
Paragraph (2) shall not be construed to prohibit the distribution in commerce of new all-terrain vehicles that comply with the requirements of that paragraph but also incorporate characteristics or components that are not covered by those requirements. Any such characteristics or components shall be subject to the requirements of section 2064 of this title.
If the American National Standard ANSI/SVIA-1-2007 is revised through the applicable consensus standards development process after the date on which the product safety standard for all-terrain vehicles is published in the Federal Register, the American National Standards Institute shall notify the Commission of the revision.
Within 120 days after it receives notice of such a revision by the American National Standards Institute, the Commission shall issue a notice of proposed rulemaking in accordance with section 553 of title 5 to amend the product safety standard for all-terrain vehicles to include any such revision that the Commission determines is reasonably related to the safe performance of all-terrain vehicles, and notify the Institute of any provision it has determined not to be so related. The Commission shall promulgate an amendment to the standard for all-terrain vehicles within 180 days after the date on which the notice of proposed rulemaking for the amendment is published in the Federal Register.
Notwithstanding any other provision of this chapter, the Commission may, pursuant to sections 2056 and 2058 of this title, amend the product safety standard for all-terrain vehicles to include any additional provision that the Commission determines is reasonably necessary to reduce an unreasonable risk of injury associated with the performance of all-terrain vehicles.
Sections 2056 and 2058 of this title shall not apply to promulgation of any amendment of the product safety standard under paragraph (2). Judicial review of any amendment of the standard under paragraph (2) shall be in accordance with chapter 7 of title 5.
Until a mandatory consumer product safety standard applicable to 3-wheeled all-terrain vehicles promulgated pursuant to this chapter is in effect, new 3-wheeled all-terrain vehicles may not be imported into or distributed in commerce in the United States. Any violation of this subsection shall be considered to be a violation of section 2068(a)(1) of this title and may also be enforced under section 2066 of this title.
The Commission shall issue a final rule in its proceeding entitled "Standards for All Terrain Vehicles and Ban of Three-wheeled All Terrain Vehicles".
In the final rule, the Commission, in consultation with the National Highway Traffic Safety Administration, may provide for a multiple factor method of categorization that, at a minimum, takes into account-
In the final rule, the Commission, in consultation with the National Highway Traffic Safety Administration, shall review the standard published under subsection (a)(1) and establish additional safety standards for all-terrain vehicles to the extent necessary to protect the public health and safety. As part of its review, the Commission shall consider, at a minimum, establishing or strengthening standards on-
In this section:
The term "all-terrain vehicle" or "ATV" means-
The term "ATV action plan" means a written plan or letter of undertaking that describes actions the manufacturer or distributor agrees to take to promote ATV safety, including rider training, dissemination of safety information, age recommendations, other policies governing marketing and sale of the ATVs, the monitoring of such sales, and other safety related measures, and that is substantially similar to the plans described under the heading "The Undertakings of the Companies in the Commission Notice" published in the Federal Register on September 9, 1998 (63 FR 48199-48204).
15 U.S.C. § 2089
EDITORIAL NOTES
CODIFICATIONAugust 14, 2008, referred to in subsec. (a)(2)(B), was in the original "the date of enactment of the Act" and was translated as reading "the date of enactment of the Consumer Product Safety Improvement Act of 2008", which enacted this section, to reflect the probable intent of Congress.
STATUTORY NOTES AND RELATED SUBSIDIARIES
EFFECTIVE DATESubsec. (c) of this section effective on the date that is 30 days after Aug. 14, 2008, see section 239(a) of Pub. L. 110-314, set out as an Effective Date of 2008 Amendment note under section 2051 of this title.
DEADLINE FOR RULE BY CONSUMER PRODUCT SAFETY COMMISSION ON STANDARDS FOR ALL TERRAIN VEHICLES Pub. L. 112-28, §9, Aug. 12, 2011, 125 Stat. 282, provided that: "The Commission shall issue the final rule described in section 42(d) of the Consumer Product Safety Act (15 U.S.C. 2089(d)) not later than 1 year after the date of enactment of this Act [Aug. 12, 2011]."
- Commission
- The term "Commission" means the Consumer Product Safety Commission, established by section 2053 of this title.
- commerce
- The term "commerce" means trade, traffic, commerce, or transportation-(A) between a place in a State and any place outside thereof, or(B) which affects trade, traffic, commerce, or transportation described in subparagraph (A).
- manufacturer
- The term "manufacturer" means any person who manufactures or imports a consumer product.
- private labeler
- The term "private labeler" means an owner of a brand or trademark on the label of a consumer product which bears a private label.
- risk of injury
- The term "risk of injury" means a risk of death, personal injury, or serious or frequent illness.
- import
- The terms "import" and "importation" include reimporting a consumer product manufactured or processed, in whole or in part, in the United States.
- distribution in commerce
- The terms "to distribute in commerce" and "distribution in commerce" mean to sell in commerce, to introduce or deliver for introduction into commerce, or to hold for sale or distribution after introduction into commerce.
- Administration
- the terms "Administration" and "Administrator" mean the Small Business Administration and the Administrator thereof, respectively; and