Section 64.34.232 - [Repealed Effective 1/1/2028] Survey maps and plans(1) A survey map and plans executed by the declarant shall be recorded simultaneously with, and contain cross-references by recording number to, the declaration and any amendments. The survey map and plans must be clear and legible and contain a certification by the person making the survey or the plans that all information required by this section is supplied. All plans filed shall be in such style, size, form and quality as shall be prescribed by the recording authority of the county where filed, and a copy shall be delivered to the county assessor.(2) Each survey map shall show or state: (a) The name of the condominium and a legal description and a survey of the land in the condominium and of any land that may be added to the condominium;(b) The boundaries of all land not subject to development rights, or subject only to the development right to withdraw, and the location and dimensions of all existing buildings containing units on that land;(c) The boundaries of any land subject to development rights, labeled "SUBJECT TO DEVELOPMENT RIGHTS SET FORTH IN THE DECLARATION"; any land that may be added to the condominium shall also be labeled "MAY BE ADDED TO THE CONDOMINIUM"; any land that may be withdrawn from the condominium shall also be labeled "MAY BE WITHDRAWN FROM THE CONDOMINIUM";(d) The extent of any encroachments by or upon any portion of the condominium;(e) To the extent feasible, the location and dimensions of all recorded easements serving or burdening any portion of the condominium and any unrecorded easements of which a surveyor knows or reasonably should have known, based on standard industry practices, while conducting the survey;(f) Subject to the provisions of subsection (8) of this section, the location and dimensions of any vertical unit boundaries not shown or projected on plans recorded under subsection (4) of this section and that unit's identifying number;(g) The location with reference to an established datum of any horizontal unit boundaries not shown or projected on plans recorded under subsection (4) of this section and that unit's identifying number;(h) The location and dimensions of any real property in which the unit owners will own only an estate for years, labeled as "leasehold real property";(i) The distance between any noncontiguous parcels of real property comprising the condominium;(j) The general location of any existing principal common amenities listed in a public offering statement under RCW 64.34.410(1)(j) and any limited common elements, including limited common element porches, balconies, patios, parking spaces, and storage facilities, but not including the other limited common elements described in RCW 64.34.204 (2) and (4);(k) In the case of real property not subject to development rights, all other matters customarily shown on land surveys.(3) A survey map may also show the intended location and dimensions of any contemplated improvement to be constructed anywhere within the condominium. Any contemplated improvement shown must be labeled either "MUST BE BUILT" or "NEED NOT BE BUILT."(4) To the extent not shown or projected on the survey map, plans of the existing units must show or project:(a) Subject to the provisions of subsection (8) of this section, the location and dimensions of the vertical boundaries of each unit, and that unit's identifying number;(b) Any horizontal unit boundaries, with reference to an established datum, and that unit's identifying number; and(c) Any units in which the declarant has reserved the right to create additional units or common elements under RCW 64.34.236(3), identified appropriately.(5) Unless the declaration provides otherwise, the horizontal boundaries of part of a unit located outside of a building have the same elevation as the horizontal boundaries of the inside part and in such case need not be depicted on the survey map and plans.(6) Upon exercising any development right, the declarant shall record either a new survey map and plans necessary to conform to the requirements of subsections (1), (2), and (3) of this section or new certifications of a survey map and plans previously recorded if the documents otherwise conform to the requirements of those subsections.(7) Any survey map, plan, or certification required by this section shall be made by a licensed surveyor.(8) In showing or projecting the location and dimensions of the vertical boundaries of a unit under subsections (2)(f) and (4)(a) of this section, it is not necessary to show the thickness of the walls constituting the vertical boundaries or otherwise show the distance of those vertical boundaries either from the exterior surface of the building containing that unit or from adjacent vertical boundaries of other units if: (a) The walls are designated to be the vertical boundaries of that unit;(b) the unit is located within a building, the location and dimensions of the building having been shown on the survey map under subsection (2)(b) of this section; and(c) the graphic general location of the vertical boundaries are shown in relation to the exterior surfaces of that building and to the vertical boundaries of other units within that building.Repealed by 2024 c 321,§ 502, eff. 1/1/2028.1997 c 400 § 2; 1992 c 220 § 10; 1989 c 43 § 2-109.